Waterproof LED Driver 96W
$61.00
-
$1,281.00
Waterproof LED Driver 150W
$80.64
-
$1,693.44
Waterproof LED Driver 96W
$61.00
-
$1,281.00
Waterproof LED Driver 150W
$80.64
-
$1,693.44
Waterproof LED Driver 120W
SMT-012-120VW
Non-dimmable LED Driver
SMARTS
120w led driver High sealing performance, waterproof registration IP67, can be used for indoor and outdoor lighting projects, LED Power supply 120W can work stably in humid environments, and the wa...
120w led driver High sealing performance, waterproof registration IP67, can be used for indoor and outdoor lighting projects, LED Power supply 120W can work stably in humid environments, and the warranty is 5 years.
| MODEL | SMT-012-120VW | SMT-024-120VW | |
| OUTPUT | DC VOLTAGE | 12V | 24V |
| RATED CURRENT | 10.0A | 5.0A | |
| CURRENT RANGE | 0~10.0A | 0~5.0A | |
| RATED POWER | 120W | 120W | |
| RIPPLE&NOISE(max) | 150mV | 150mV | |
| VOLTAGE TOLERANCE | ±0.5V | ±0.5V | |
| SETUP RISE TIME | 80ms/110V,220VAC | ||
| HOLD UP TIME(Typ.) | 60ms/110V,220VAC | ||
| INPUT | VOLTAGE RANGE | 100~265VAC | |
| FREQUENCY RANGE | 50~60Hz | ||
| POWER FACTOR(Typ.) | |||
| EFFICIENCY(Typ.) | ﹥83% | ||
| AC CURRENT(Typ.) | 0.92A/110VAC, 0.86A/220VAC | ||
| INRUSH CURRENT (Typ.) | COLD START 50A/110VAC, 220VAC | ||
| PROTECTION | Short circuit | Protection type:recovers automatically after condition is removed | |
| Overload | overload protected@145-160% above peak rating | ||
| Over temperature | Protection type:Shut down o/p voltage,re-power on to removed | ||
| ENVIRONMENT | WORKING TEMP. | -30~+50℃ (Refer to output load derating curve) | |
| WORKING HUMIDITY | 20~99% RH non-condensing(Waterproof) | ||
| STORAGE TEMP.,HUMIDITY | -40~+80℃,10~99%RH | ||
| SAFETY&EMC | SAFETY STANDARDS | CE ETL Mark(LVD),IP67 | |
| WITHSTAND VOLTAGE | I/P-O/P:1.5KVAC IP-GND:1.5KVAC | ||
| EMC Test Standards | EN55015:2006;EN61547:1995+2000;EN61000-3-2:2006 | ||
| EN61000-3-3:1995+A2:2005;EN61346-1:2001;EN61347-2-13:2006 | |||
| NOTE | 1.All parameters NOT specially mentoned are measured at 110VAC,220VAC input,rated load and 25℃ of ambient temperature. | ||
| 2.Ripple&noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf&10uf parallel capacitor. | |||
| 3.Tolerance:includes set up tolerance,line regulation and load regulation. | |||
