Triac Dimmable Driver 45W (Standard Size)
$64.24
-
$1,349.04
Enclosure LED Power Supply 500W
$141.00
-
$2,961.00
Triac Dimmable Driver 45W (Standard Size)
$64.24
-
$1,349.04
Enclosure LED Power Supply 500W
$141.00
-
$2,961.00
Waterproof LED Driver 20W
SMT-012-020VW
Non-dimmable LED Driver
SMARTS
SMARTS slim size led driver 20W itself is not dimmable power supply , 3-year warranty. it is IP67 rated and protected against short circuiting.The 12V 24V led power supply 20W Can work stably in va...
SMARTS slim size led driver 20W itself is not dimmable power supply , 3-year warranty. it is IP67 rated and protected against short circuiting.The 12V 24V led power supply 20W Can work stably in various harsh environments.
| MODEL | SMT-012-020WW | SMT-024-020VW | |
| OUTPUT | DC VOLTAGE | 12V | 24V |
| RATED CURRENT | 1.66Amp | 0.83Amp | |
| CURRENT RANGE | 0~1.66A | 0~0.83A | |
| RATED POWER | 20W | 20W | |
| RIPPLE&NOISE(max) | 150mV | 150mV | |
| CURRENT TOLERANCE | ±0.5V | ±0.5V | |
| SETUP RISE TIME | 80ms/110,220VAC | 81ms/110,220VAC | |
| HOLD UP TIME(Typ.) | 60ms/110-220VAC | 60ms/110-220VAC | |
| INPUT | VOLTAGE RANGE | 100~265VAC | |
| FREQUENCY RANGE | 50~60Hz | ||
| POWER FACTOR(Typ.) | |||
| EFFICIENCY(Typ.) | >83% | >83% | |
| AC CURRENT(Typ.) | 3.5A/110,220VAC | 2.0A/110,220VAC | |
| INRUSH CURRENT (Typ.) | COLD START 50A/110~220VAC | ||
| PROTECTION | Short circuit | Protection type:recovers automatically after condition is removed | |
| Overload | overload protected@145-160% above peak rating | ||
| Over temperature | Protection type:Shut down o/p voltage,re-power on to removed | ||
| ENVIRONMENT | WORKING TEMP. | -30~+50℃ (Refer to output load derating curve) | |
| WORKING HUMIDITY | 20~99% RH non-condensing(Waterproof) | ||
| STORAGE TEMP.,HUMIDITY | -40~+80℃,10~99%RH | ||
| SAFETY&EMC | SAFETY STANDARDS | UL/ROHS/CE Mark(EMC,LVD),IP67 | |
| WITHSTAND VOLTAGE | I/P-O/P:1.5KVAC IP-GND:1.5KVAC | ||
| EMC Test Standards | EN55015:2006;EN61547:1995+2000;EN61000-3-2:2006 | ||
| EN61000-3-3:1995+A2:2005;EN61346-1:2001;EN61347-2-13:2006 | |||
| NOTE | 1.All parameters NOT specially mentoned are measured at 110V, 220VAC input,rated load and 25℃ of ambient temperature. | ||
| 2.Ripple&noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf&10uf parallel capacitor. |
|||
| 3.Tolerance:includes set up tolerance,line regulation and load regulation. | |||
