0-10V Dimmable Driver 45W (Standard Size)
SMT-012-045VD
0-10V Dimmable LED Driver
SMARTS
SMT-012-045VD is a 45w pwm dimmable led driver power supply 12v, The size of this power supply is 180*60*34mm, small in size, suitable for installation in small indoor spaces,5 years warranty
M...
SMT-012-045VD is a 45w pwm dimmable led driver power supply 12v, The size of this power supply is 180*60*34mm, small in size, suitable for installation in small indoor spaces,5 years warranty
| Model | SMT-012-045VD | SMT-024-045VD | |
| Output | DC Voltage | 12V | 24V |
| Voltage Accuracy | ±0.5V | ||
| Rated current | 0~3.75A | 0~1.87A | |
| Rated power | 45W | ||
| Input | Voltage Range | 100~130VAC, 170~265VAC | |
| Frequency Range | 47~63HZ | ||
| Power Factor ( Typ.) | PF≧0.90/110V / PF≧0.90/220V | ||
| Full Load Efficiency(Typ.) | >88%(110V)/ >88%(220V) | >88%(110V)/ >88%(220V) | |
| AC Current(Typ.) | 0.52A@110V | 0.26A@220V | |
| Leakage current | ﹤0.35mA/120VAC / ﹤0.7mA/220VAC | ||
| Protection | Short Circuit | Protection type: Hiccup mode, recovers automatically after fault condition is removed | |
| Over Current | ≦1.4*Iout | ||
| Over temperature | 100℃±10℃ shut down o/p voltage, re-power on to recover | ||
| Environment | Working TEMP. | -40~+50℃ | |
| Working Humidity | 20~95%RH,non-condensing | ||
| Storage TEM.,Humidity | -40~+80℃,10~95%RH | ||
| TEMP.coefficient | ±0.03%/℃(0~50℃) | ||
| Vibration | 10~500Hz,5G 12min./1 cycle,period for 72min.each along X,Y,Z axes | ||
| Safety&EMC | Safety standards | EN61347-1 EN61347-2-13 | |
| Withstand voltage | I/P-O/P:3.75KVAC I/P-FG:1.88KVAC O/P-FG:0.5KVAC | ||
| Isolation resistance | I/P-O/P I/P-FG O/P-FG:100MΩ/500VDC/25℃/70%RH | ||
| EMC EMISSION | Compliance toEN55015,EN61000-3-2 (≧50%load) | ||
| EMC IMMUNITY | Compliance to EN61000-4-2,3,4,5,6 ,11,EN61547,A light industry level (surge4KV) | ||
| Others | Weight | 0.4Kg | |
| Size | 180*60*35mm(L*W*H) | ||
| packing | 355*215*215mm/20pcs /CTN 185*65*45mm for inner box | ||
| Notes | 1. All parameters NOT specially mentioned are measured at 110V~220VAC input , rated load and 25℃of ambient temperature. | ||
| 2. Ripple& noise are measured at 20MHz of bandwidth by using a 12”twisted pair-wire terminated with a 0.1uf &47uf parallel capacitor. | |||
| 3. Tolerance:includes set us tolerance,line regulation and load regulation . | |||
