DALI 2& PUSH Dim C.V. LED Driver 60W (DT8)
$101.60
-
$2,133.60
DALI 2& PUSH Dim C.V. LED Driver 200W (DT6)
$174.80
-
$3,670.80
DALI 2& PUSH Dim C.V. LED Driver 60W (DT8)
$101.60
-
$2,133.60
DALI 2& PUSH Dim C.V. LED Driver 200W (DT6)
$174.80
-
$3,670.80
DALI 2& PUSH Dim C.V. LED Driver 300W (DT6)
SMT-12300V-DP2
Smarts Power
dali & push is a dimmable 300W led power driver aluminum case, waterproof rating ip67, input voltage 100-277vac, UL certified, sold primarily in North America, with built-in NFC capability for ...
dali & push is a dimmable 300W led power driver aluminum case, waterproof rating ip67, input voltage 100-277vac, UL certified, sold primarily in North America, with built-in NFC capability for setting address code and fine-tuning output voltage
| Model | SMT-12300V-DP2 | SMT-24300V-DP2 | SMT-36300V-DP2 | SMT-48300V-DP2 | |
| Output | DC Voltage | 12V (12-13V adjust by NFC) | 24V (24-25.5V adjust by NFC) | 36V (36-38V adjust by NFC) | 48V (48-50V adjust by NFC) |
| Voltage Tolerance | ±0.2V | ||||
| Rated current | 25A | 12.5A | 8.34A | 6.25A | |
| Rated power | 300W | ||||
| Load Regulation | ±2% | ||||
| Input | Standby power consumption | ≤0.5W | ≤0.5W | ≤0.6W | ≤0.6W |
| Voltage Range | 110-277VAC | ||||
| Frequency Range | 47 - 63Hz | ||||
| Power Factor(Typ.)@ full load | PF≥0.98@120VAC PF≥0.95@230VAC PF≥0.90@277VAC (Full loading) | ||||
| THD(Typ.)@ full load | ≤10%@120VAC ; ≤10%@230VAC; ≤15%@277VAC | ||||
| Efficiency(Typ.)@ full load | 88%@120VAC; | 89%@120VAC; 91%@230VAC; 91%@277VAC | |||
| AC Current(Max.) | 3.5A | 3.5A | 3.5A | 3.5A | |
| Inrush Current (Typ.) | 60A,9us@50%Ipeak(120VAC);70A,188us@50%Ipeak(230VAC) 180A,4.4us@50%Ipeak (277VAC) | ||||
| Leakage current | <0.5mA | ||||
| Protection | Short Circuit | Hiccup mode, recover automatically after fault condition is removed | |||
| Over Load | ≤120% ,hiccup mode, recover automatically after fault condition is removed | ||||
| Over temperature | Ambient temp. over 55℃±10℃, output will be off; recovers automatically after temp. drops. | ||||
| Environment | Working TEMP. | -40~+70℃ (see below derating curve) | |||
| Working Humidity | 20 - 95%RH,non-condensing | ||||
| Storage TEM.,Humidity | -40 - +80℃,10 - 95%RH | ||||
| TEMP.coefficient | ±0.03%/℃(0 - 50℃) | ||||
| Vibration | 10~500Hz, 2G 10min./1 cycle,period for 60min. each along X,Y,Z axes | ||||
| Safety&EMC | Safety standards | EN61347-1 EN61347-2-13 (EU) & UL8750 (US) | |||
| Withstand voltage | I/P-O/P:3.75KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC (EU); I/P-O/P:1.88KVAC (US) | ||||
| Isolation resistance | I/P-O/P I/P-FG O/P-FG:100MΩ/500VDC/25℃/70%RH | ||||
| EMC Emission | EN55015 EN61000-3-2 EN61000-3-3 (EU)≥50% Load & FCC Part 15 B (US) | ||||
| EMC Immunity | EN61000-4-2,3,4,5,6 ,11, EN61547 | ||||
| Others | Weight | 1.15KG | |||
| Dimension | 301*78*25.1mm (L*W*H) | ||||
| packing | 390*325*185mm/20PCS/CTN G.W.:24KG/CTN | ||||
| Notes | 1. All parameters NOT specially mentioned are measured at 120VAC/230VAC input , rated load and 25℃of ambient temperature. | ||||
| 2. Tolerance: includes set up tolerance, line regulation and load regulation . | |||||
| 3. The power supply is considered as a component that will be operated in combination with final Equipment. Since EMC performance will be affected by the complete installation, the final equipment manufactures must be-qualify EMC Directive on the complete installation again. | |||||
