Bulk purchases

All products can enjoy free shipping service if the price is over $50. If you require drivers more than 30pcs, please feel free to contact us online, (or email: sales1@smartspower.com), we will provide the best purchasing plan

DMX512 Dim CV LED drivers 30w (IP20)

SMT-12030-1C-P
DMX512 Dimmable LED Driver
SMARTS
The DMX512 driver led 30w has NFC function which enables you read and write DMX512 address or adjust output voltage by mobile Easy NFC APP or special NFC device. Through it to drive your RGBCW LED...
Output Voltage*
Road Output*
Bulk Savings*
$76.00
$76.00

The DMX512 driver led 30w has NFC function which enables you read and write DMX512 address or adjust output voltage by mobile Easy NFC APP or special NFC device. Through it to drive your RGBCW LED fixtures, providing full color and flawless brightness. Find Ustellar led strips to make sure the compatibility.

Model SMT-12030-XC-P SMT-24030-XC-P
X=1 for DIM (DW);  
Output DC Voltage 12V 24V
Voltage Tolerance ±0.5V
Voltage Regulation ±0.5%
Rated current CH1=2.5A CH1=1.25A
Rated power 30W  (class 2 power units)   
Load Regulation ±2%
Input Voltage Range 100-277VAC 
Frequency Range 47 - 63Hz
Power Factor(Typ.)@ full load PF≥0.95/ 230VAC  (Full loading)
THD(Typ.)@ full load ≤10%@120VAC  ≤20%@230VAC  ≤20%@277VAC
Efficiency(Typ.)@ full load 80% @230VAC 82%@230VAC
AC Current(Max.) 0.4A 0.4A
Inrush Current (Typ.) 7A, 50%, 350us @120VAC;  25A, 50% , 200us @277VAC 
Leakage current <0.5mA 
Protection Short Circuit Hiccup mode, recover automatically after fault condition is removed
Over Load ≤120% ,hiccup model, recover automatically after fault condition is removed
Over temperature ≤100℃±10℃, shutdown output voltage, recover automatically after temperature drop
Protection Class II
Environment Working TEMP. -40~+60℃ (see below derating curve)
Working Humidity 20 - 90%RH ,non-condensing 
Storage TEM.,Humidity -40 - +80℃,10 - 95%RH
TEMP.coefficient ±0.03%/℃(0 - 50℃)
Vibration 10~500Hz, 2G 10min./1 cycle,period for 60min. each along X,Y,Z axes 
  Safety standards EN61347-1   EN61347-2-13 (EU)   &  UL8750  UL1310 (US)
  Withstand voltage I/P-O/P:3.75KVAC (EU) &  I/P-O/P:1.5KVAC (US)
Safety&EMC Isolation resistance I/P-O/P:100MΩ/500VDC/25℃/70%RH  
  EMC Emission EN55015   EN61000-3-2  EN61000-3-3 (EU)  &  FCC Part 15 B (US)
  EMC Immunity EN61000-4-2,3,4,5,6,11      EN61547
Others Net Weight 0.35KG
Dimension 171.5*54*20mm (L*W*H)
packing /
Notes 1. All parameters NOT specially mentioned are measured at 230VAC input , rated load and 25℃of ambient temperature.
2. Tolerance: includes set up tolerance, line regulation and load regulation .
3. The power supply is considered as a component that will be operated in combination with final Equipment. Since EMC performance will be affected by the complete installation, the final equipment manufactures must be-qualify EMC Directive on the complete installation again.


DMX512 Dim CV LED drivers 30w

※Input terminal with 3P; Live Wire(L) , Neutral Wire (N) . Note: vacant for middle terminal
※Output terminals with 6P; LED SEC positive (LED+), LED negative (LED-). Connected to LED light; Common anode design
2P for DIM (DW) dimming;
※Please make sure you connect these correctly ,otherwise your product will not work correctly and could be damaged.

Note: there is external antenna at output side. Don't disassemble!

DMX512 Dim CV LED drivers 30w Connecting Diagram

DMX512 address setting Operation
※The default address for the DMX driver is 001.
※Address settings device:

DMX512 Dim CV LED drivers 30w Address settings device

※Address settings:
① RDM setting address:
Set the address by the RDM device. For detailed operation, please refer to RDM device instruction manual.
② NFC setting address:
The DMX address can be read and written by a mobile with Easy NFC APP or NFC handheld device (NFC read & write device: NFC-RW) by close to the NFC signal area of the DMX512 driver.

Adjust output voltage Operation
※Adjust output voltage slightly for DMX512 driver
1) The driver output voltage can be read and written by a mobile with Easy NFC APP or NFC handheld device (NFC read & write device: NFC-RW) by close to the NFC signal area of the DMX512 driver.
2) Voltage range: level 1~10, each level is 0.2V. The default output voltage level is 5. Such as SMT-24030-XC-P, default is level 5 corresponding to 24V. By adjusting output voltage slightly, you could get 23.2v to 25V freely.

See figure below
Simple operation about DMX512 address reset and adjusting output voltage slighting by a mobile with Easy NFC APP or NFC handheld device (NFC read & write device: NFC-RW)

DMX512 Dim CV LED drivers 30w

Product Certificate

You have successfully subscribed!
This email has been registered