Products Categories

Bulk purchases

Warning!!!The destination tariff will be charged by the buyer. All products can enjoy free shipping service if the price is over $50. If you require drivers more than 30pcs, please feel free to contact us online, (or email: sales1@smartspower.com), we will provide the best purchasing plan

DALI-2 D4I Intelligent CC LED Driver 60W 160-1600mA (Metal housing)

SMT-DI060W160-D4II-YT
DALI-2 Dimmable LED Driver
SMARTS
60W constant current DALI-2 D4I dimmable led driver. Full metal housing design, waterproof level ip20. Multiple frequencies available, adjustable dimming curve. Suitable for indoor and outdoor dry ...
Output Voltage*
Output Current*
Bulk Savings*
$71.76
$71.76

60W constant current DALI-2 D4I dimmable led driver. Full metal housing design, waterproof level ip20. Multiple frequencies available, adjustable dimming curve. Suitable for indoor and outdoor dry space lighting projects. UL certified, mainly sold to North America

Model SMT-DI060W120-D4II-YT SMT-DI060W160-D4II-YT
Certificate UL/FCC/CE /ClassP/TYPE HL/SELV/ RoHS / Reach/ENEC/ICES/UKCA
Output Rated current 120mA-1200mA  160mA-1600mA 
DC Voltage 24-93VDC 12-54VDC
No-load voltage 98Vmax 60Vmax
Rated power 60Wmax
Voltage Tolerance Output current ± 10mA for ≤ 300mA, ± 20mA for ≥ 300mA, and ± 30mA for ≥ 1000mA
Line Regulation <0.5%
Load Regulation <0.5%
Input Voltage Range 120-277VAC
Frequency Range 47 - 63Hz
Power Factor (Typ.)  ≥0.98@120VAC 60Hz    ≥0.96@230VAC 50HZ    ≥0.92@277VAC 60HZ
No load power (Max) <1.5W
Standby power (Max) <0.5W
THD(Typ.) @ full load ≤15%
Efficiency @ full load 88%@120VAC 60Hz    89%@230VAC 50HZ     89%@277VAC 60HZ
AC Current (Max.) 0.65A
Inrush Current (Typ.) 28.7A, 204us@50%Ipeak@120V     55.2A, 98us@50%Ipeak@230V 66.0A, 220us@50%Ipeak@2770V
Leakage current <0.5mA
Protection Short Circuit Hiccup mode, recovers automatically after fault condition is removed
Over voltage Hiccup or constant power mode, reboots automatically after fault condition is removed
Over temperature Ambient temp. over 50± 5℃, output current will be reduced to 50%;
Ambient temp.Over 40 ± 5℃,recovers automatically.
Ambient temp.over 60 ± 5℃, output current will be reduced to 0%;
Ambient temp.Over 40 ± 5℃,recovers automatically.
Environment Working TEMP -40~+45℃ (see below derating curve)  
Working Humidity 20 -90%RH  non-condensing 
Storage TEM.,Humidity -40 - +80℃,10 - 95% RH 
TEMP.coefficient ±0.03%/℃(0 - 50℃)
Vibration 10~500Hz, 2G 12min./1 cycle, period for 72min. each along X,Y,Z axes
Safety & EMC Safety standards EN61347-1   EN61347-2-13(EU)  &  UL8750 (US)
Withstand voltage I/P-O/P:3.75KVAC    I/P-FG:1.5KVAC    O/P-FG:0.5KVAC (EU)
Strobe test standard IEEE 1789 Flicker free
Surge Immunity Test AC Power Line:Differential Mode 2 kV, Common Mode 4 kV
Isolation resistance I/P-O/P:100MΩ / 500VDC / 25℃ / 70%RH
EMC Emission EN55015   EN61000-3-2,3(EU)  &  FCC Part15 Subpart B; ANSI C63.4:2014(US)
Others Net Weight 300g
Dimension 314*30*21.7mm (L*W*H)
Packing 350*340*150mm    50pcs /CTN
Notes 1. All parameters NOT specially mentioned are measured at rated load and 25℃of ambient temperature.
2. To extend the driver's using life, please reduce the loading at lower input voltage .
3. LED driver Meets the harmonic emissions requirements of ANSI C82.77-10.

MCB recommendation

When the input voltage is 120Vac,the number of LED Driver matched by circuit breakers is as follows:
MCB Type Level The number of  LED Driver
C type(breaking
capacity:6KA)
10A 10
13A 13
16A 17
20A 21
25A 26
When the input voltage is 230Vac,the number of LED Driver matched by circuit breakers is as follows:
MCB Type Level The number of  LED Driver
C type(breaking
capacity:6KA)
10A 20
13A 26
16A 32
20A 40
25A 50
When the input voltage is 277Vac,the number of LED Driver matched by circuit breakers is as follows:
MCB Type Level The number of  LED Driver
C type(breaking
capacity:6KA)
10A 24
13A 31
16A 38
20A 48
25A 55

Note

1. The above quantities of the led drivers connected on the Type C is recommended base on the maximum ambient temperature is 50°C

2. The breaker should be selected according to the input rated voltage, input rated current, ambient temperature, and trip characteristic curve.

Mechanical Specification

Globle wire gauge
LF6
Input wire and Dimming wire Gray terminals 6P (0.2mm2-1.5mm2/24-16AWG)
Output wire& External temperature wire Red/Black terminals 4P (0.2mm2-1.5mm2/24-16AWG)
Remarks:Please make sure you connect these correctly otherwise your product will not function correctly and could be damaged.

Dimming Operation and Connecting Diagram:

DALI bus on

Note

1. When Turn on the internal DALI bus power.No need external bus power supply.

2. The model name SMT-DI060WXXX-D4II means that there is no auxiliary power supply and temperature control, so there is no corresponding wiring for the LED driver.

3. The model name SMT-DI060WXXX-D4II-Y means that there is an auxiliary power supply but no temperature control, so the LED driver has no temperature control wiring.

4. The model name SMT-DI060WXXX-D4II-T means that there is no auxiliary power supply but there is temperature control, so the LED driver has no auxiliary power wiring.

5. The model name SMT-DI060WXXX-D4II-YT means that there is an auxiliary power supply and temperature control.

NFC function

Adjust output current slightly by NFC

The output current can be read and written by a mobile with ProNFC APP or NFC handheld device (NFC read & write device: NFC-RW) by close to the NFC signal area of the Dimmable LED driver.

Set Address easily by NFC

The address can be read and written by a mobile with Set NFC APP or NFC handheld device (NFC read & write device: NFC-RW) by close to the NFC signal area of the Dimmable LED driver.

Product Certificate

You have successfully subscribed!
This email has been registered