Bulk purchases

All products can enjoy free shipping service if the price is over $50. If you require drivers more than 30pcs, please feel free to contact us online, (or email: sales1@smartspower.com), we will provide the best purchasing plan

5 in 1 Dim J-BOX LED Driver 200W

SMT-012-200VTDHV2
5 in 1 Dimmable LED Driver
SMARTS
This series offers a wide range of wattage from 30W to 384W. The 200w led driver has the characteristics of high power factor? 0.98 and effiency up to 0.9. We would to recommend 12v 24v LED strips ...
Output Voltage*
Size*
Bulk Savings*
$228.40
$228.40

This series offers a wide range of wattage from 30W to 384W. The 200w led driver has the characteristics of high power factor? 0.98 and effiency up to 0.9. We would to recommend 12v 24v LED strips when you are looking for compatible lights.

model SMT-012-200VTDHV2 (1.0 version) SMT-024-200VTDHV2  (1.0 version)
SMT-012-200VTDHWV2  (2.0 version)   SMT-024-200VTDHWV2  (2.0 version)
Output DC Voltage 12V 24V
Rated Current 16.67A 8.33A
Rated Power 200W 200W
Voltage Tolerance ±0.5V
Voltage Regulation ±0.5%
Load Regulation ±2% ±1%
Input Voltage Range 110-277VAC
Frequency Range 47-63Hz
Power Factor @ full load 0.98@120VAC  0.97@277VAC 0.98@120VAC  0.95@277VAC
THD(Typ.)@ full load <20%
Efficiency @ full load 83% @120Vac      87%@277Vac 86% @120Vac      88%@277Vac
AC Current(Max.) 2.3A@100Vac
Inrush Current (Typ.) 15A, 50%, 1.4ms @120Vac     30A, 50%, 1.4m,s @277Vac
Leakage current <0.50mA
protection Short Circuit shut down o/p voltage, re-power on to recover after fault condition is removed
Over Loading ≤120% constant current limiting, auto-recovery
Over temperature 100℃±10℃ shut down o/p voltage, automatically recover after cooling.
Environment Working TEMP. -40~+60℃ (see below derating curve)
Working Humidity 20~90%RH, non-condensing
Storage TEMP. Humidity -40~+80℃,10~95%RH
TEMP .coefficient ±0.03%/℃(0~50℃)
Vibration 10~500Hz, 5G 10min./1 cycle,period for 60min. each along X,Y,Z axes
Safety&EMC Safety standards UL8750+UL1310
Withstand voltage I/P-O/P:1.88KVAC  
Isolation resistance I/P-O/P:100MΩ/500VDC/25℃/70%RH
EMC EMISSION FCC Part 15 B
Others Weight About 1.8Kg
Size 1.0 version: 260*105*45mm / 2.0 version: 260*125*45mm
packing 10PCS/CTN (L*W*H)
Notes 1. All parameters if NOT specially mentioned are measured at 120VAC input , rated load and 25℃of ambient temperature.
2. To extend the driver's using life ,please reduce the loading at lower input voltage.

5 in 1 Dim J-BOX LED Driver 200W

  • Inputwire Black and White to be connected?to?AC?L and N ,Green wire go ground,
  • Output wireRed to LED Positive side (+) , Black ?to LED Negative side (-).??
  • Dimming cable DIM (+) Purpleto 0/1-10V dimmer signal(+ ),DIM (-) Grey?to 0/1-10V dimmer signal (-) ?
  • Please make sure your connect these correctly otherwise your product will not function correctly and could be damaged.

¡ö?Connecting Diagram

Using TRIAC/Phase cut dimming

1.The Pulse-Width Modulation (PWM) of output voltage can be adjusted through input terminal of the AC phase line(L) by connection a phase /Triac dimmer of lighting system.

2.Work with forward phase /leading edge ,MLV and?reverse phase /trailing edge ,ELV,TRIAC dimmers.

3.Please try to use dimmers with power at least 1.5 times as the output power of the driver.

5 in 1 Dim J-BOX LED Driver 200W Connecting Diagram

?Using 0-10/1-10V dimming

?5 in 1 Dim J-BOX LED Driver 200W Connecting Diagram

Product Certificate

You have successfully subscribed!
This email has been registered