277V 0-10V Dim Driver 120W(Standard Size)
SMT-012-120VDHW
0-10V Dimmable LED Driver
SMARTS
SMT-012-120VDHW The dimming mode is 0 10v, the shell is aluminum, and the waterproof level is ip67, which can adapt to the outdoor humid environment,This Waterproof 0 10v dimmable 24v 120w led driv...
SMT-012-120VDHW The dimming mode is 0 10v, the shell is aluminum, and the waterproof level is ip67, which can adapt to the outdoor humid environment,This Waterproof 0 10v dimmable 24v 120w led driver It has a dimming range of 0~100%, and is very stable without flickering.
| Model | SMT-012-120VDHW | SMT-024-120VDHW | |
| Output | DC Voltage | 12V | 24V |
| Voltage Accuracy | ±0.5V | ||
| Rated current | 0-10.0A | 0-5.0A | |
| Rated power | 120W | ||
| Ripple&noise Max. | 250mVp-p | ||
| Input | Voltage Range | 100-277VAC | |
| Frequency Range | 47~63HZ | ||
| Power Factor ( Typ.) | >0.90@110V,277V | ||
| Full Load Efficiency(Typ.) | |||
| AC Current(Typ.) | 1.263A/120VAC 0.891A/170VAC 0.689A/220VAC 0.572A/277VAC | ||
| Leakage current | ﹤0.25mA/110V,277VAC | ||
| Protection | Short Circuit | Protection type: Hiccup mode, recovers automatically after fault condition is removed | |
| Over voltage | ≦325VAC | ||
| Over temperature | 100℃±10℃ shut down o/p voltage, re-power on to recover | ||
| Environment | Working TEMP. | -40~+60℃ | |
| Working Humidity | 20~95%RH,non-condensing | ||
| Storage TEM.,Humidity | -40~+80℃,10~95%RH | ||
| TEMP.coefficient | ±0.03%/℃(0~50℃) | ||
| Vibration | 10~500Hz,5G 12min./1 cycle,period for 72min.each along X,Y,Z axes | ||
| Safety&EMC | Safety standards | Class P, Type HL, EN61347-1 EN61347-2-13 IP67 | |
| Withstand voltage | I/P-O/P:3.75KVAC I/P-FG:1.88KVAC O/P-FG:0.5KVAC | ||
| Isolation resistance | I/P-O/P I/P-FG O/P-FG:100MΩ/500VDC/25℃/70%RH | ||
| EMC EMISSION | Compliance to EN55015,EN61000-3-2 (≧50%Load) | ||
| EMC IMMUNITY | Compliance to EN61000-4-2,3,4,5,6,8,11,EN61547,Alight industry level (surge4KV) | ||
| Others | Weight | 1.32Kg | |
| Size | 240*66*53mm(L*W*H) | ||
| packing | 329*279*176mm/10pcs | ||
| Notes | 1. All parameters NOT specially mentioned are measured at 110~277VAC input , rated load and 25℃of ambient temperature. | ||
| 2. Ripple& noise are measured at 20MHz of bandwidth by using a 12”twisted pair-wire terminated with a 0.1uf &47uf parallel capacitor. | |||
| 3. Tolerance:includes set us tolerance,line regulation and load regulation . | |||
