Waterproof LED Driver 200W
SMT-012-200VW
Non-dimmable LED Driver
SMARTS
SMARTS 200w 24v led driver high efficiency input 100-265 with ETL CE Nominal lifetime up to 30,000 h.12V 24V led power supply 200W Comply with European and American market safety standards
MOD...
SMARTS 200w 24v led driver high efficiency input 100-265 with ETL CE Nominal lifetime up to 30,000 h.12V 24V led power supply 200W Comply with European and American market safety standards
| MODEL | SMT-012-200VW | SMT-024-200VW | |
| OUTPUT | DC VOLTAGE | 12V | 24V |
| RATED CURRENT | 16.67A | 8.33A | |
| CURRENT RANGE | 0~16.67A | 0~8.33A | |
| RATED POWER | 200W | 200W | |
| RIPPLE&NOISE(max) | 150mV | 150mV | |
| VOLTAGE TOLERANCE | ±0.5V | ±0.5V | |
| SETUP RISE TIME | 80ms/110VAC, 220VAC | ||
| HOLD UP TIME(Typ.) | 60ms/110VAC, 220VAC | ||
| INPUT | VOLTAGE RANGE | 90~265VAC | |
| FREQUENCY RANGE | 50~60Hz | ||
| POWER FACTOR(Typ.) | >0.95@110VAC ; >0.98@220VAC | ||
| EFFICIENCY(Typ.) | ﹥91% | ||
| AC CURRENT(Typ.) | 2.10A@110VAC; 1.01A@220VAC | ||
| INRUSH CURRENT (Typ.) | COLD START 50A/110VAC, 220VAC | ||
| PROTECTION | Short circuit | Protection type:recovers automatically after condition is removed | |
| Overload | overload protected@145-160% above peak rating | ||
| Over temperature | Protection type:Shut down o/p voltage,re-power on to removed | ||
| ENVIRONMENT | WORKING TEMP. | -30~+55℃ (Refer to output load derating curve) | |
| WORKING HUMIDITY | 20~99% RH non-condensing(Waterproof) | ||
| STORAGE TEMP.,HUMIDITY | -40~+80℃,10~99%RH | ||
| SAFETY&EMC | SAFETY STANDARDS | CE ETL Mark(EMC,LVD),IP67 | |
| WITHSTAND VOLTAGE | I/P-O/P:3.0KVAC IP-GND:3.0KVAC | ||
| EMC Test Standards | EN55015:2006;EN61547:1995+2000;EN61000-3-2:2006 | ||
| EN61000-3-3:1995+A2:2005;EN61346-1:2001;EN61347-2-13:2006 | |||
| NOTE | 1.All parameters NOT specially mentoned are measured at 110VAC,220VAC input,rated load and 25℃ of ambient temperature. | ||
| 2.Ripple&noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf&10uf parallel capacitor. | |||
| 3.Tolerance:includes set up tolerance,line regulation and load regulation. | |||
