Catégories

Achats en vrac

Si vous avez besoin de pilotes de plus de 100 pièces, n'hésitez pas à nous contacter en ligne (ou par courrier électronique: sales1@smartselectronics.com), nous vous fournirons le meilleur plan d'achat

ELV/Triac Dimmable J-BOX Electronic Transformer 288W

SET-24288J
Triac Dimmable LED Driver
Smarts Power
The Smarts Power triac dimmable electronic transformer JB-VT-ET series 288W 24V, the input voltage is 120VAC, passed the UL certification, which is in line with the global lighting law. It is mainl...
Output Voltage*
Size*
Bulk Savings*
$182.08
$182.08

The Smarts Power triac dimmable electronic transformer JB-VT-ET series 288W 24V, the input voltage is 120VAC, passed the UL certification, which is in line with the global lighting law. It is mainly sold to North America.

Model Number SET-24288J
Output Type
Reted Power 96W * 3
Reted Voltage 24V
Reted Current 4A * 3
Voltage Tolerance ±0.5V
Voltage Regulation ±0.5%
Load Regulation ±1%
Input Type
Voltage Range 120V
Frequency Range 47-63HZ
Efficiency(Typ.) 87%@120VAC
Total Harmonic Distortion THD< 20%(@100% load)
Power Factor(typ.) 0.98@120VAC
AC Current(Typ.) 2.79A
Inrush Current(Typ.) -
Leakage Current <0.5mA/ 120VAC
PROTECTION
Short Circuit Hiccup mode, recovers automatically after fault condition is removed.
Over Load Hiccup mode, recovers automatically after fault condition is removed.
ENVIRONMENT
Working Temp. Tcase=-40 ~ +60 (Please refer to“OUTPUTLOAD vs TEMPERATURE”section)
Working humidity 20 ~ 95% RH non-condensing
Storage temp., Humidity -40 ~ +90, 10 ~ 95% RH
Temp .coefficient ±0.03%/℃(0~50℃)
Vibration 10~500Hz, 5G 10min./1 cycle,period for 60min. each along X,Y,Z axes
SAFETY & EMC
Safety standards UL8750, Class 2
Safety standards I/P-O/P:1.88KVAC
OTHERS
Dimension 7.40x4.74x1.65 inch (L*W*H)
Packing -


ELV/Triac Dimmable J-BOX Electronic Transformer 288W

 Mounting

1.This driver must be installed in a well-ventilated area free from explosive gases and vapors. Air circulation is essential for heat dissipation.

2.Recommended spacing between LED drivers should be a minimum of 4” (10cm).

3.Do not mount driver close to or above objects that can radiate heat. Vertical mounting is highly recommended.

4.Select an appropriate location that is able to support the weight of the product.

5.Use the mounting tabs on the left and right side of the driver to mount the product.

constant voltage ELV/Triac Dimmable J-BOX Electronic Transformer 60WConnectionPreparation

constant voltage ELV/Triac Dimmable J-BOX Electronic Transformer 60W

InputConnections & Grounding

constant voltage ELV/Triac Dimmable J-BOX Electronic Transformer 60W

OutputConnections

constant voltage ELV/Triac Dimmable J-BOX Electronic Transformer 60W

Wiring Diagram

constant voltage ELV/Triac Dimmable J-BOX Electronic Transformer 60W

Certificat de produit

Vous vous êtes enregistré avec succès!
Cet e-mail a été enregistré