Categories
- All PRODUCTS
- DALI-2 & PUSH Dimmable LED Driver
- Slim size Constant Current LED Driver
- DMX512 Dimmable LED Driver
- 0-10V Dimmable LED Driver
- Non-Dimmable LED Driver
- Triac/ELV Dim LED Electronic Transformer
- Triac Dimmable LED Driver
- DALI Dimmable LED Driver
- 5 in 1 Dimmable LED Driver
- Wall-Mounted & Desktop Power Adapter
- Wireless Dimmable LED Driver
- Multi-Output Current LED Driver
- SMARTS Dimmer
- Contact Us
Top Sellers
Contact Us
Email: sales1@smartselectronics.com
Whatsapp : 0086-13489577737
Tel : 0086-13489577737
Skype : steven821228




ELV/Triac Dimmable J-BOX Electronic Transformer 180W
180W triac dimming led driver constant voltage working mode, work efficiency reached 87%, built-in PFC function, PF value up to 0.98, electronic transformer and junction box integrated design, easy to install
Model Number | SET-12180J |
Output Type | |
Reted Power | 60W * 3 |
Reted Voltage | 12V |
Reted Current | 5A * 3 |
Voltage Tolerance | ±0.5V |
Voltage Regulation | ±0.5% |
Load Regulation | ±1% |
Input Type | |
Voltage Range | 120V |
Frequency Range | 47-63HZ |
Efficiency(Typ.) | 87%@120VAC |
Total Harmonic Distortion | THD< 20%(@100% load) |
Power Factor(typ.) | 0.98@120VAC |
AC Current(Typ.) | 1.74A |
Inrush Current(Typ.) | - |
Leakage Current | <0.5mA/ 120VAC |
PROTECTION | |
Short Circuit | Hiccup mode, recovers automatically after fault condition is removed. |
Over Load | Hiccup mode, recovers automatically after fault condition is removed. |
ENVIRONMENT | |
Working Temp. | Tcase=-40 ~ +60 (Please refer to“OUTPUTLOAD vs TEMPERATURE”section) |
Working humidity | 20 ~ 95% RH non-condensing |
Storage temp., Humidity | -40 ~ +90, 10 ~ 95% RH |
Temp .coefficient | ±0.03%/℃(0~50℃) |
Vibration | 10~500Hz, 5G 10min./1 cycle,period for 60min. each along X,Y,Z axes |
SAFETY & EMC | |
Safety standards | UL8750, Class 2 |
Safety standards | I/P-O/P:1.88KVAC |
OTHERS | |
Dimension | 7.40x4.74x1.65 inch (L*W*H) |
Packing | - |
Mounting
1.This driver must be installed in a well-ventilated area free from explosive gases and vapors. Air circulation is essential for heat dissipation.
2.Recommended spacing between LED drivers should be a minimum of 4” (10cm).
3.Do not mount driver close to or above objects that can radiate heat. Vertical mounting is highly recommended.
4.Select an appropriate location that is able to support the weight of the product.
5.Use the mounting tabs on the left and right side of the driver to mount the product.
ConnectionPreparation
InputConnections & Grounding
OutputConnections
Wiring Diagram