0-10V Dimmable Driver 20W (Standard Size)
SMT-012-020VD
0-10V Dimmable LED Driver
SMARTS
Smarts VD series is small size constant voltage 0 10v dimmable led driver power supply This driver is 12v 20W Suitable for indoor projects with limited space. With quick connection terminals, it is...
Smarts VD series is small size constant voltage 0 10v dimmable led driver power supply This driver is 12v 20W Suitable for indoor projects with limited space. With quick connection terminals, it is more convenient and quicker to install 12V 20W led driver
| Model | SMT-012-020VD | SMT-024-020VD | |
| Output | DC Voltage | 12V | 24V |
| Voltage Accuracy | ±0.5V | ||
| Rated current | 0~1.66A | 0~0.83A | |
| Rated power | 20W | 20W | |
| Input | Voltage Range | 100~130VAC / 170~265VAC | |
| Frequency Range | 47~63HZ | ||
| Power Factor ( Typ.) | PF≧0.90/110V, PF≧0.90/220V | ||
| Full Load Efficiency(Typ.) | >88%/110V | >88% 220V | |
| AC Current(Typ.) | 0.23A/110V | 0.11A/220V | |
| Leakage current | ﹤0.7mA/110V, 220VAC | ||
| Protection | Short Circuit | Protection type: Hiccup mode, recovers automatically after fault condition is removed | |
| Over voltage | ≦280VAC | ||
| Over temperature | 100℃±10℃ shut down o/p voltage, re-power on to recover | ||
| Environment | Working TEMP. | -40~+50℃ | |
| Working Humidity | 20~95%RH,non-condensing | ||
| Storage TEM.,Humidity | -40~+80℃,10~95%RH | ||
| TEMP.coefficient | ±0.03%/℃(0~50℃) | ||
| Vibration | 10~500Hz,5G 12min./1 cycle,period for 72min.each along X,Y,Z axes | ||
| Safety&EMC | Safety standards | EN61347-1 EN61347-2-13 | |
| Withstand voltage | I/P-O/P:3.75KVAC I/P-FG:1.88KVAC O/P-FG:0.5KVAC | ||
| Isolation resistance | I/P-O/P I/P-FG O/P-FG:100MΩ/500VDC/25℃/70%RH | ||
| EMC EMISSION | Compliance toEN55015,EN61000-3-2 (≧50%load) | ||
| EMC IMMUNITY | Compliance to EN61000-4-2,3,4,5,6,8,11,EN61547,A light industry level | ||
| Others | Weight | 0.16Kg | |
| Size | 140*45*27mm(L*W*H) | ||
| packing | 320*280*215mm/50pcs /CTN 145*50*36mm for inner box | ||
| Notes | 1. All parameters NOT specially mentioned are measured at 110V,220VAC input , rated load and 25℃of ambient temperature. | ||
| 2. Ripple& noise are measured at 20MHz of bandwidth by using a 12”twisted pair-wire terminated with a 0.1uf &47uf parallel capacitor. | |||
| 3. Tolerance:includes set us tolerance,line regulation and load regulation . | |||
