Bulk purchases

All products can enjoy free shipping service if the price is over $50. If you require drivers more than 30pcs, please feel free to contact us online, (or email: sales1@smartspower.com), we will provide the best purchasing plan

DMX512 Dim CV LED drivers 100w (IP67)

SMT-12100-1C-A
DMX512 Dimmable LED Driver
SMARTS
SMARTS DMX512 100W led drive dimmable  is compatible with universal DMX consoles which ensures high safety standard and be used worldwide. The channel quantity can be set from 1CH to 5CH. Compatib...
Output Voltage*
Road Output*
Bulk Savings*
$141.92
$141.92

SMARTS DMX512 100W led drive dimmable  is compatible with universal DMX consoles which ensures high safety standard and be used worldwide. The channel quantity can be set from 1CH to 5CH. Compatible with most lighting strip light.

Model SMT-12100-XC-A SMT-24100-XC-A
X=1 , 2,  3,  4,  5 for DIM (DW);  CCT(TW);  RGB;  RGBW;  RGBW+CCT (RGBCW)
Output DC Voltage 12V 24V
Voltage Tolerance ±0.5V
Voltage Regulation ±0.5%
Rated current CH1+CH2+CH3+CH4+CH5=8.3A CH1+CH2+CH3+CH4+CH5=4.17A
Rated power 100W
Load Regulation ±2%
Input Voltage Range 100-277VAC 
Frequency Range 47 - 63Hz
Power Factor(Typ.@ full load PF≥0.98/ 230VAC  (Full loading)
THD(Typ.)@ full load <15%
Efficiency(Typ.)@ full load 89% @230VAC 89%@230VAC
AC Current(Max.) 1.3A 1.3A
Inrush Current (Typ.) 48.5A,164us@50%Ipeak
Leakage current <0.5mA 
Protection Short Circuit Hiccup mode, recover automatically after fault condition is removed
Over Load ≤120% ,hiccup model, recover automatically after fault condition is removed
Over temperature ≤100℃±10℃, shutdown output voltage, recover automatically after temperature drop
Protection Class II
Environment Working TEMP. -40~+60℃ (see below derating curve)
Working Humidity 20 - 95%RH ,non-condensing 
Storage TEM.,Humidity -40 - +80℃,10 - 95%RH
TEMP.coefficient ±0.03%/℃(0 - 50℃)
Vibration 10~500Hz, 5G 10min./1 cycle,period for 60min. each along X,Y,Z axes 
Safety&EMC   Safety standards EN61347-1   EN61347-2-13 (EU)   &  UL8750  UL1310 (US)
Withstand voltage I/P-O/P:3.75KVAC I/P-FG:1.88KVAC O/P-FG:0.5KVAC (EU) & I/P-O/P:1.5KVAC(US)
Isolation resistance I/P-O/P:100MΩ/500VDC/25℃/70%RH  
EMC Emission EN55015   EN61000-3-2  EN61000-3-3 (EU)  &  FCC Part 15 B (US)
EMC Immunity EN61000-4-2,3,4,5,6,11      EN61547
Others Net Weight 0.90KG
Dimension 230*78*25mm (L*W*H)
packing 10PCS/CTN   
Notes 1. All parameters NOT specially mentioned are measured at 230VAC input , rated load and 25℃of ambient temperature.
2. Tolerance: includes set up tolerance, line regulation and load regulation .
3. The power supply is considered as a component that will be operated in combination with final Equipment. Since EMC performance will be affected by the complete installation, the final equipment manufactures must be-qualify EMC Directive on the complete installation again.


DMX512 Dim CV LED drivers 100w

※Input Rubber cable 3*1.0mm²(VDE approval), the Y/G cable connect with (FG) , Brown with AC (L), Blue with AC(N) (EU)
Input SJOW Rubber cable 3*18AWG (UL approval), the green cable connect with (FG) ,Black with AC (L), White with AC(N) (US)
※Dimming cable: Purple (D+), Brown (D-) and Gray (GND) connect to DMX dimmer / system.
※Output cable to be connected to LED Light;
DIM (DW) dimming: Rubber cable
Black is output ( V+) Positive, White is output (V-) negative
CCT (TW) dimming: 1015 electronic cable , (V+) 16AWG; (V-) 18AWG
Black is output ( V+) Positive, While (CW-) and Yellow (WW-) are output (V-) negative
RGB dimming: 1015 electronic cable , (V+) 16AWG; (V-) 18AWG
Black is output ( V+) Positive, Red (R-), Green (G-) and Blue (B-) are output (V-) negative
RGBW dimming: 1015 electronic cable , (V+) 16AWG; (V-) 18AWG
Black is output ( V+) Positive, Red (R-), Green (G-) ,Blue (B-) , White (W-) are output (V-) negative
RGB+CCT dimming: 1015 electronic cable , (V+) 16AWG; (V-) 18AWG
Black is output ( V+) Positive, Red (R-), Green (G-) ,Blue (B-) , White (CW-) and Yellow (WW-) are output (V-) negative.;

※Please make sure you connect these correctly ,otherwise your product will not work correctly and could be damaged.
Note: there is external antenna at output side. Don't disassemble!

DMX512 Dim CV LED drivers 100w Connecting Diagram

DMX512 address setting Operation
※The default address for the DMX driver is 001.
※Address settings device:

DMX512 Dim CV LED drivers 100w Address settings device

※Address settings:
① RDM setting address:
Set the address by the RDM device. For detailed operation, please refer to RDM device instruction manual.
② NFC setting address:
The DMX address can be read and written by a mobile with Easy NFC APP or NFC handheld device (NFC read & write device: NFC-RW) by close to the NFC signal area of the DMX512 driver.

Adjust output voltage Operation
※Adjust output voltage slightly for DMX512 driver
1) The driver output voltage can be read and written by a mobile with Easy NFC APP or NFC handheld device (NFC read & write device: NFC-RW) by close to the NFC signal area of the DMX512 driver.
2) Voltage range: level 1~10, each level is 0.2V. The default output voltage level is 5. Such as SMT-24030-XC-P, default is level 5 corresponding to 24V. By adjusting output voltage slightly, you could get 23.2v to 25V freely.

See figure below
Simple operation about DMX512 address reset and adjusting output voltage slighting by a mobile with Easy NFC APP or NFC handheld device (NFC read & write device: NFC-RW)

DMX512 Dim CV LED drivers 100w

12VDC / 1CH / 1PCS - $141.92

Product Certificate

You have successfully subscribed!
This email has been registered