DALI 2 & PUSH Dim J-BOX Driver 150W (DT6)
$161.60
-
$3,393.60
DALI 2 & PUSH Dim J-BOX Driver 96W (DT6)
$132.72
-
$2,787.12
DALI 2 & PUSH Dim J-BOX Driver 150W (DT6)
$161.60
-
$3,393.60
DALI 2 & PUSH Dim J-BOX Driver 96W (DT6)
$132.72
-
$2,787.12
DALI 2 & PUSH Dim J-BOX Driver 120W (DT6)
SMT-JB12120V-DP2
DALI Dimmable LED Driver
Smarts Power
The dimming mode of the 120w constant voltage led driver is dali-2 & push dimmable, which complies with dali-2 dimming protocol IEC62386. The built-in NFC function allows you to set the address...
The dimming mode of the 120w constant voltage led driver is dali-2 & push dimmable, which complies with dali-2 dimming protocol IEC62386. The built-in NFC function allows you to set the address code and fine-adjust the output voltage through the NFC application software
| Model | SMT-JB12120V-DP2 | SMT-JB24120V-DP2 | SMT-JB36120V-DP2 | SMT-JB48120V-DP2 | |
| Certificate | UL/cUL/SELV / CE | ||||
| Output | DC Voltage | 12V | 24V | 36V | 48V |
| Voltage range(adjust by NFC) | 12-13.5V | 24-26V | 36-38V | 48-50V | |
| Voltage Tolerance | ±0.5V | ||||
| Voltage Regulation | ±0.5% | ||||
| Rated current | 10A | 5A | 3.33A | 2.5A | |
| Rated power | 120W | ||||
| Load Regulation | ±2% | ±1% | ±1% | ±1% | |
| Input | Voltage Range | 100-277VAC | |||
| Frequency Range | 47 - 63Hz | ||||
| Power Factor (Typ.) @ full load | 0.99@120VAC 0.97@277VAC | ||||
| Efficiency(Typ.) @ full load |
87.5%@120VAC 89%@277VAC |
88%@120VAC 89%@277VAC |
89.5%@120VAC 91%@277VAC |
89.5%@120VAC 91%@277VAC |
|
| AC Current (Max.) | 1.5A | ||||
| Inrush Current (Typ.) | 23.2A, 50%, 360us @120VAC 54A, 50% , 280us @277VAC | ||||
| Leakage current | <0.5mA | ||||
| Protection | Short Circuit | Hiccup mode, automatically recover after fault condition removed | |||
| Over temperature | Ambient temp. over 55℃±10℃, output will be off; recovers automatically after temp. drops. | ||||
| Over Load | ≤120% ,hiccup mode, recover automatically after fault condition is removed | ||||
| Environment | Working TEMP. | -40 ~ +70℃ (see below derating curve) | |||
| Working Humidity | 20 ~ 95%RH,non-condensing | ||||
| Storage TEM.,Humidity | -40 ~ +80℃,10 ~ 95%RH | ||||
| TEMP.coefficient | ±0.03%/℃(0 ~ 50℃) | ||||
| Vibration | 10 ~ 500Hz, 2G 10min./1 cycle,period for 60min. each along X,Y,Z axes | ||||
| Safety & EMC | Safety standards | EN61347-1; EN61347-2-13 UL8750 | |||
| Withstand voltage | I/P-O/P:1.80KVAC I/P-FG:1.80KVac O/P-FG:1.80KVac | ||||
| Isolation resistance | I/P-O/P:100MΩ/500VDC/25℃/70%RH | ||||
| EMC Emission | EN55015 EN61000-3-2 EN61000-3-3 FCC Part 15 Subpart B | ||||
| Others | Net Weight | 0.9Kg | |||
| Dimension | 241*125*42.7mm(L*W*H) | ||||
| Packing | 300*280*215mm 10pcs /CTN | ||||
| Notes | 1.All parameters NOT specially mentioned are measured at 120VAC input, rated load and 25℃of ambient temperature. | ||||
| 2.Under low input voltage, reduced output is required to ensure a long life. | |||||
