277V 0-10V Dim J-BOX Driver 30W
$58.96
-
$1,238.16
277V 0-10V Dim J-BOX Driver 150W
$170.60
-
$3,582.60
277V 0-10V Dim J-BOX Driver 30W
$58.96
-
$1,238.16
277V 0-10V Dim J-BOX Driver 150W
$170.60
-
$3,582.60
277V 0-10V Dim J-BOX Driver 200W
SMT-012-200VDH
0-10V Dimmable LED Driver
SMARTS
SMT-012-200VDH Passed ul certification is 0 10v dimmable led driver power supply 12v 200w, high PF>0.95, high Efficiency>88%,Has a seven-year warranty.
Model
SMT-012-200VDH (1.0 version)S...
SMT-012-200VDH Passed ul certification is 0 10v dimmable led driver power supply 12v 200w, high PF>0.95, high Efficiency>88%,Has a seven-year warranty.
| Model | SMT-012-200VDH (1.0 version) SMT-012-200VDHV2 (2.0 version) SMT-012-200VDHWV2 (3.0 version) |
SMT-024-200VDH (1.0 version) SMT-024-200VDHV2 (2.0 version) SMT-024-200VDHWV2 (3.0 version) |
|
| Output | DC Voltage | 12V | 24V |
| Rated Current | 16.67A | ||
| Rated Power | 200W | ||
| Voltage Tolerance | ±0.5V | ||
| Voltage Regulation | ±0.5% | ||
| Load Regulation | ±2% | ||
| Input | Voltage Range | 110-277VAC | |
| Frequency Range | 47-63Hz | ||
| Power Factor(Typ.)@ full load | 0.98@120VAC 0.97@277VAC | 0.98@120VAC 0.95@277VAC | |
| THD(Typ.)@ full load | <20% | ||
| Efficiency(Typ)@ full load | 83% @120Vac / 87%@277Vac | 86% @120Vac / 88%@277Vac | |
| AC Current(Max.) | 2.3A@100Vac | ||
| Inrush Current (Typ.) | 15A, 50%, 1.4ms @120Vac 30A, 50%, 1.4m,s @277Vac | ||
| Leakage current | <0.50mA | ||
| Protection | Short Circuit | shut down o/p voltage, re-power on to recover after fault condition is removed | |
| Over Loading | ≤120% constant current limiting, auto-recovery | ||
| Over temperature | 100℃±10℃ shut down o/p voltage, automatically recover after cooling. | ||
| Environment | Working TEMP. | -40~+60℃ (see below derating curve) | |
| Working Humidity | 20~90%RH, non-condensing | ||
| Storage TEMP. Humidity | -40~+80℃,10~95%RH | ||
| TEMP .coefficient | ±0.03%/℃(0~50℃) | ||
| Vibration | 10~500Hz, 5G 10min./1 cycle,period for 60min. each along X,Y,Z axes | ||
| Safety&EMC | Safety standards | UL8750+UL1310 | |
| Withstand voltage | I/P-O/P:1.88KVAC | ||
| Isolation resistance | I/P-O/P:100MΩ/500VDC/25℃/70%RH | ||
| EMC EMISSION | FCC Part 15 B | ||
| Others | Weight | 1.8Kg (1.0 version) | |
| Size | 1.0 version: 260*103*46mm /2.0 version: 260*105*45mm (L*W*H) 3.0 version: 260*125*45mm (L*W*H) | ||
| packaging | Packaging: 10PCS | ||
| Notes | 1. All parameters NOT specially mentioned are measured at 110V/277VAC input , rated load and 25℃of ambient temperature. | ||
| 2. Ripple& noise are measured at 20MHz of bandwidth by using a 12”twisted pair-wire terminated with a 0.1uf &47uf parallel capacitor. | |||
| 3. Tolerance:includes set us tolerance,line regulation and load regulation . | |||
