Din Rail 5 in 1 Dimmable LED driver 100w
SMT-012-100TDDR
5 in 1 Dimmable LED Driver
SMARTS
model
SMT-012-100TDDR
SMT-024-096TDDR
Output
DC Voltage
12VDC
24VDC
Voltage Accuracy
±5%
±5%
Rated current
8.33Amp
4.0Amp
Rated power
100W
96W (Class 2)
Voltage Regulation
±0.5%
Load...
| model | SMT-012-100TDDR | SMT-024-096TDDR | |
| Output | DC Voltage | 12VDC | 24VDC |
| Voltage Accuracy | ±5% | ±5% | |
| Rated current | 8.33Amp | 4.0Amp | |
| Rated power | 100W | 96W (Class 2) | |
| Voltage Regulation | ±0.5% | ||
| Load Regulation | ±1% | ||
| Input | Voltage Range | 100-277 VAC | |
| Frequency Range | 47~63HZ | ||
| Power Factor ( Typ.) | 0.98@120VAC ,0.95@277VAC | 0.98@120VAC ,0.95@277VAC | |
| THD(Typ. ) @ full load | <20%@120VAC & 277VAC | ||
| Full Load Efficiency(Typ.) | 83%@120VAC, 85%@277VAC | 83%@120VAC, 86%@277VAC | |
| AC Current(Typ.) | 1.3A | ||
| Inrush Current(Typ.) | 20A, 50%, 1.6ms @120VAC; 25A, 50% 1.2ms @277VAC | ||
| Leakage current | <0.5mA | ||
| Protection | Short Circuit | shut down o/p voltage, re-power on to recover after fault condition removed | |
| Over Loading | ≤120% Hiccup mode,recovers automatically after fault condition is removed | ||
| Over temperature | 100℃±10℃ shut down o/p voltage, automatically recover after cooling. | ||
| Environment | Working TEMP. | -40~+60℃ | |
| Working Humidity | 20~90%RH,non-condensing | ||
| Storage TEM.,Humidity | -40~+80℃,10~95%RH | ||
| TEMP.coefficient | ±0.03%/℃(0~50℃) | ||
| Vibration | 10~500Hz,2G 10min./1 cycle,period for 60min.each along X,Y,Z axes | ||
| Safety&EMC | Safety standards | UL8750+UL1310 , CAN/CSA-C22.2 No.250.13 | |
| Withstand voltage | I/P-O/P:1.88KVac | ||
| Isolation resistance | I/P-O/P:100MΩ/500VDC/25℃/70%RH | ||
| EMC EMISSION | FCC 47 CFR Part 15 ,Subpart B | ||
| Others | Weight | 0.4Kg | |
| Size | 55*90*100mm(L*W*H) | ||
| packing | 50PCS/CTN , carton size:330*330*130mm | ||
| Notes | 1. All parameters NOT specially mentioned are measured at 110VAC, 277VAC input , Rated load and 25℃of ambient temperature. 2. Tolerance:includes set us tolerance,line regulation and load regulation . 3. The power supply is considered as a component that will be operated in combination with final Equipment. Since EMC performance will be affected by the complete installation, the final equipment manufactures must be-qualify EMC Directive on the complete installation again. |
||
Using one dimming ---TRIAC/Phase cut dimming
- The Pulse-Width Modulation (PWM) of output voltage can be adjusted through input terminal of the AC phase line(L) byconnection a phase /Triac dimmer of lighting system.
- Working with forward phase /leading edge ,MLV and Reverse phase /trailing edge ,ELV,TRIAC dimmers
- Min loading is about 10%
Please try to use dimmers with power at least 1.5 times as the output power of the driver.
