0-10V Dimmable Driver 30W (Standard Size)
SMT-012-030VD
0-10V Dimmable LED Driver
SMARTS
SMT-024-030VD is 0 10V dimmable constant voltage led driver 24v power supply 30w, Size is 140*45*28mm Can be installed in small spaces and very light. It also has overload protection, overheat prot...
SMT-024-030VD is 0 10V dimmable constant voltage led driver 24v power supply 30w, Size is 140*45*28mm Can be installed in small spaces and very light. It also has overload protection, overheat protection, short circuit protection functions Can well protect 30W LED bulb
| Model | SMT-012-030VD | SMT-024-030VD | |
| Output | DC Voltage | 12VDC | 24VDC |
| voltage Accuracy | ±3% | ||
| Current | 2.5Amp | 1.25Amp | |
| Rated power | 30W | 30W | |
| Input | Voltage Range | 100~265VAC,100-130VAC, 170-265VAC | |
| Frequency Range | 47~63HZ | ||
| PF(Typ.) | PF>0.90 | ||
| Full Load Efficiency(Typ) | >88% | >88% | |
| AC Current (Typ.) | 0.34A | 0.17A | |
| Leakage current | ﹤0.7mA/110-220VAC | ||
| Protection | Short Circuit | Protection type: Hiccup mode, recovers automatically after fault condition is removed | |
| Over voltage | ≦280VAC | ||
| Over temperature | 100℃±10℃ shut down o/p voltage, re-power on to recover | ||
| Environme | Working TEMP. | -40~+50℃ | |
| Working Humidity | 20~95%RH,non-condensing | ||
| Storage TEM.,Humidity | -40~+80℃,10~95%RH | ||
| TEMP.coefficient | ±0.03%/℃(0~50℃) | ||
| Vibration | 10~500Hz,5G 12min./1 cycle,period for 72min.each along X,Y,Z axes | ||
| Safety&EMC | Safety standards | EN61347-1 EN61347-2-13. IP40 | |
| Withstand voltage | I/P-O/P:3.75KVAC I/P-FG:1.88KVAC O/P-FG:0.5KVAC | ||
| Isolation resistance | I/P-O/P I/P-FG O/P-FG:100MΩ/500VDC/25℃/70%RH | ||
| EMC EMISSION | Compliance to EN55015,EN61000-3-2 (≧50%Load) | ||
| EMC IMMUNITY | Compliance to EN61000-4-2,3,4,5,6,8,11,EN61547,A light industry level | ||
| Others | Weight | 0.4Kg | |
| Size | 180*60*34mm(L*W*H) | ||
| packing | 355*215*215mm/20pcs /CTN | ||
| Notes | 1. All parameters NOT specially mentioned are measured at 110v~220VAC input , rated load and 25℃of ambient temperature. | ||
| 2. Ripple& noise are measured at 20MHz of bandwidth by using a 12”twisted pair-wire terminated with a 0.1uf &47uf parallel capacitor. | |||
| 3. Tolerance:includes set us tolerance,line regulation and load regulation . | |||
