277V Class 2 Triac Dim Driver 180W(Standard Size)
multi-output class 2 12V 24V Triac dimming light fixture driver 180W IP67 has a waterproof design. In humid environments, it can be used with LED downlight 100W to achieve a flicker-free dimming effect. Dimming range 0-100%
model | SMT-012-180VTHW2 | SMT-024-192VTHW2 | |
Output | DC Voltage | 12V | 24V |
Voltage Accuracy | ±0.5V | ±0.5V | |
Rated current | 15.0A (3*5A) | 8.0A (2*4A) | |
Rated power | 180W | 192W | |
Voltage Tolerance | ±0.5V | ±0.5V | |
Load Regulation | ±1% | ±1% | |
Voltage Regulation | ±0.5% | ±0.5% | |
Input | Voltage Range | 100~277V AC | |
Frequency Range | 47~63HZ | ||
THD(Typ.) @full load | <20% | ||
Power Factor ( Typ.) | 0.98@120VAC 0.95@277VAC | 0.98@120VAC 0.95@277VAC | |
Full Load Efficiency(Typ.) | 86%@120V 88%@277VAC | 87%@120V 89%@277VAC | |
AC Current(Typ.) | 2.2A@100VAC | 2.3A@100VAC | |
Inrush Current (Typ.) | 19A ,50%,1.3ms @120VAC ; 38A,50%,960us @277VAC | ||
Leakage current | ﹤0.50mA | ||
Protection | Short Circuit | Hiccup mode, recovers automatically after fault condition is removed. | |
Over temperature | 100℃±10℃ shut down o/p voltage, automatically recover after cooling. | ||
Over Loading | ≤120% constant current limiting, auto-recovery | ||
Over voltage | ≦140VAC(90~135V) , ≦270VAC(170~265V) | ||
Environment | Working TEMP. | -40~+60℃ | |
Working Humidity | 20~90%RH,non-condensing | ||
Storage TEM.,Humidity | -40~+80℃,10~95%RH | ||
TEMP.coefficient | ±0.03%/℃(0~50℃) | ||
Vibration | 10~500Hz,2G 10min./1 cycle,period for 60min.each along X,Y,Z axes | ||
Safety&EMC | Safety standards | UL8750+UL1310 | |
Withstand voltage | I/P-O/P:1.88KVAC | ||
Isolation resistance | I/P-O/P:100MΩ/500VDC/25℃/70%RH | ||
EMC EMISSION | FCC 47 CFR Part 15 ,Subpart B | ||
EMC IMMUNITY | Compliance to EN55015; EN61000-4-2,3,4,5,6,8,11,EN61547 Alight industry level (surge4KV) | ||
Others | Net Weight | 1.7Kg | |
Size | 276*78*47mm (L*W*H) | ||
packing | 329*279*176mm , 10PCS/ctn | ||
Notes | 1. All parameters NOT specially mentioned are measured at 110V/277VAC input , rated load and 25℃of ambient temperature. | ||
2. Tolerance:includes set us tolerance,line regulation and load regulation . |
Input wire 18AWG Black and White to be connected to AC L and N ,Green wire go ground,
Output cable 2*16AWG,Red" (+) to LED Positive side (+) , "Black"(-) to LED Negative side (-).
Three groups output cables for SMT-012-180VTHW2 and two groups for SMT-024-192VTHW2
Please make sure your connect these correctly otherwise your product will not function correctly and could be damaged.