Waterproof LED Driver 300W
SMT-012-300VW
Non-dimmable LED Driver
SMARTS
SMARTS LED driver 300 watt High efficiency & high power aluminum shell Waterproof grade IP67.AC to DC LED power supply 300W Can follow in the damp underground garage
MODEL
SMT-012-300VW
SMT...
SMARTS LED driver 300 watt High efficiency & high power aluminum shell Waterproof grade IP67.AC to DC LED power supply 300W Can follow in the damp underground garage
| MODEL | SMT-012-300VW | SMT-024-300VW | SMT-036-300VW | |
| OUTPUT | DC VOLTAGE | DC12V | DC24V | DC36V |
| RATED CURRENT | 25A | 12.5A | 8.33A | |
| CURRENT RANGE | 0-25A | 0-12.5A | 0-8.33A | |
| RATED POWER | 300W | 300W | 300W | |
| RIPPLE&NOISE(max) | 150mV | 150mV | 150mV | |
| CURRENT TOLERANCE | ||||
| SETUP RISE TIME | 80ms/120VAC,220VAC | |||
| HOLD UP TIME(Typ.) | 60ms/120VAC,220VAC | |||
| INPUT | VOLTAGE RANGE | 100~265VAC | ||
| FREQUENCY RANGE | 50~60Hz | |||
| POWER FACTOR(Typ.) | >PF0.97@120VAC & 220VAC | |||
| EFFICIENCY(Typ.) | ﹥89% | |||
| AC CURRENT(Typ.) | 1.85A/120VAC,220VAC | |||
| INRUSH CURRENT (Typ.) | COLD START 50A/120VAC,220VAC | |||
| PROTECTION | Short circuit | Protection type:recovers automatically after condition is removed | ||
| Overload | overload protected@145-160% above peak rating | |||
| Over temperature | Protection type:Shut down o/p voltage,re-power on to removed | |||
| ENVIRONMENT | WORKING TEMP. | -40~+50℃ (Refer to output load derating curve) | ||
| WORKING HUMIDITY | 20~99% RH non-condensing(Waterproof) | |||
| STORAGE TEMP.,HUMIDITY | -40~+80℃,10~99%RH | |||
| SAFETY&EMC | SAFETY STANDARDS | ETL/cETL,CE Mark(EMC ,LVD),IP67 | ||
| WITHSTAND VOLTAGE | I/P-O/P:1.5KVAC IP-GND:1.5KVAC | |||
| EMC Test Standards | EN55015:2006;EN61547:1995+2000;EN61000-3-2:2006 | |||
| EN61000-3-3:1995+A2:2005;EN61346-1:2001;EN61347-2-13:2006 | ||||
| NOTE | 1.All parameters NOT specially mentoned are measured at 120~220VAC input,rated load and 25℃ of ambient temperature. | |||
| 2.Ripple&noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf&10uf parallel capacitor. | ||||
| 3.Tolerance:includes set up tolerance,line regulation and load regulation. | ||||
