Triac Dimmable Driver 200W (Standard Size)
SMT-012-200VT
Triac Dimmable LED Driver
SMARTS
Constant Voltage 200w LED driver 24v Triac dimmable led power supply is designed to meet the needs of the international market for high-power dimming lighting projects. It has an efficient overload...
Constant Voltage 200w LED driver 24v Triac dimmable led power supply is designed to meet the needs of the international market for high-power dimming lighting projects. It has an efficient overload protection function and can be matched with various brand lamps, such as LED downlight 200W
| Model | SMT-012-200VT | SMT-024-200VT | |
| Output | DC Voltage | 12V | 24V |
| Voltage Tolerance | ±0.5V | ||
| Rated current | 16.66A | 8.3A | |
| Rated power | 200W | ||
| Input | Voltage Range | 100-130Vac(ETL) 170-265Vac(CE) 180-265Vac(SAA) |
|
| Frequency Range | 50~60HZ | ||
| Power Factor | 0.65(Full loading) | ||
| Efficiency(Typ.) | 83% | 85% | |
| AC Current(Max.) | 3.2A | 3.2A | |
| Leakage current | ﹤0.50mA/120VAC | ||
| Protection | Short Circuit | Hiccup mode, recover automatically after fault condition is removed | |
| Over Current | ≤1.2*I out | ||
| Over temperature | 100℃±10℃,Shut down o/p voltage,recover automatically after temperature goes down. | ||
| Over Loading | ≤120% | ||
| Environment | Working TEMP. | -40~+60℃ | |
| Working Humidity | 20~95%RH, non-condensing | ||
| Storage TEMP. Humidity | -40~+80℃,10~95%RH | ||
| TEMP .coefficient | ±0.03%/℃(0~50℃) | ||
| Vibration | 10~500Hz,5G 12min./1 cycle,period for 72min. each along X,Y,Z axes | ||
| Safety standards | UL1012 | ||
| Withstand voltage | I/P-O/P:1500VAC | ||
| Isolation resistance | I/P-O/P:100MΩ/500VDC/25℃/70%RH | ||
| Safety&EMC | EMC EMISSION | FCC Part 15 B | |
| EMC IMMUNITY | EN61000-4-2,3,4,5,6,11(Surge 4KV) | ||
| Others | Weight | 1.65Kg | With junction 2.38Kg |
| Size | 256*78*47mm (L*W*H) | 406*87*60mm (L*W*H) | |
| packaging | 305*295*210mm 10PCS/CTN | 445*350*205mm 10PCS/CTN | |
| Notes | 1. All parameters if NOT specially mentioned are measured at 120VAC input , rated load and 25℃ of ambient temperature. | ||
| 2. To extend the driver's using life ,please reduce the loading at lower input voltage. | |||
| 3.Loading should be 5-100%. | |||
¡ù?Input black(L) and white(N) wires to be connected AC, Green wire to be connected ground; output red and black wires to be connected led lighting.
¡ö?Dimming Operation
¡ùOutput constant current level can be adjusted through input terminal of the AC phase line(L) by connection a phase/triac dimmer.
¡ùFor?forward phase,Magnetic low voltage and Triac Dimmer
