SMARTS POWER

smarts power CW series constant current waterproof led driver700ma 28W, plastic shell design, light and small, easy to install, size only 115*30*22mm, ETL certification complies with global safety lighting regulations, 2-year warranty

MODEL		SMT-040-0500CW	SMT-060-0350CW	SMT-030-0700CW	SMT-040-0700CW
OUTPUT	DC VOLTAGE	<45V	<45V	<45V	<40V
	RATED CURRENT	500mA	350mA	700mA	700mA
	VOLTAGE RANGE	25-40V	30-60V	20-30V	18-40V
	RATED POWER	20W	20W	21W	28W
	RIPPLE&NOISE(max)
	CURRENT TOLERANCE	±5%	±5%	±5%	±5%
	LINE REGULATION	±5%	±5%	±5%	±5%
	LOAD REGULATION	±5%	±5%	±5%	±5%
INPUT	VOLTAGE RANGE	90-265VAC	90-265VAC	90-265VAC	90-265VAC
	FREQUENCY RANGE	47-63Hz	47-63Hz	47-63Hz	47-63Hz
	POWER FACTOR(Typ.)	﹥0.7	﹥0.7	﹥0.7	﹥0.7
	EFFICIENCY(Typ.)	﹥82%	﹥82%	﹥82%	﹥82%
	AC CURRENT(Typ.)	0.15A/110V,220VAC	0.15A/110V, 220VAC	0.15A/110V, 220VAC
PROTECTION	SHORT CIRCUIT	Protection type:Hiccpe mode,recovers automatically after condition is removed
	OVER CURRENT	Protection
	OVER HEAT	Protection
ENVIRONMENT	WORKING TEMP.	-30~+50℃ (Refer to output load derating curve)
	WORKING HUMIDITY	20~99% RH non-condensing
	STORAGE TEMP.,HUMIDITY	-40~+80℃,10~99%RH,IP67
SAFETY&EMC	SAFETY STANDARDS	EN61347-1;EN61347-2-13;SELV
	WITHSTAND VOLTAGE	I/P-O/P:2KVAC  I/P-FG:2KVAC O/P-FG:0.5KVAC
	EMC Test Standards	EN55015;EN61000-3-2;EN61000-3-3;EN61547;EN61000-4-2,3,4,5,6,8,11;
NOTE	1.All parameters NOT specially mentoned are measured at 110V, 220VAC input,rated load and 25℃ of ambient temperature.
	2.Ripple&noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf&10uf parallel capacitor.
	3.Tolerance:includes set up tolerance,line regulation and load regulation.