Bulk purchases

All products can enjoy free shipping service if the price is over $50. If you require drivers more than 30pcs, please feel free to contact us online, (or email: sales1@smartspower.com), we will provide the best purchasing plan

5 in 1 Dim J-BOX LED Driver 100W

SMT-012-100VTDHV2
5 in 1 Dimmable LED Driver
SMARTS
This 5 in 1 dimmable drivers for led lights 12V 100W is suitable for high standard projects. Meet T24/JA8 standard. Starting time less than 0.5S. Compatible with dimmers 110V 277V. model SMT-012...
Output Voltage*
Size*
Bulk Savings*
$158.80
$158.80

This 5 in 1 dimmable drivers for led lights 12V 100W is suitable for high standard projects. Meet T24/JA8 standard. Starting time less than 0.5S. Compatible with dimmers 110V 277V.

model SMT-012-100VTDHV2 SMT-024-096VTDHV2
Output DC Voltage 12V 24V
Voltage Regulation ±0.5%
Rated current 8.33A 4.0A
Voltage Tolerance ±0.5V
Load Regulation ±1%
Rated power 100W 96W
Input Voltage Range 100-277VAC
Frequency Range 47-63Hz
Power Factor(Typ.)@ full load 0.98@120VAC  0.95@277VAC
THD(Typ.)@ full load <20%
Efficiency(Typ.)@ full load 83% @120Vac      86%@277Vac
AC Current(Max.) 1.3A@100VAC
Inrush Current (Typ.) 20A, 50%, 1.6ms
Leakage current <0.50mA
protection Short Circuit shut down o/p voltage, re-power on to recover after fault condition is removed
Over Loading ≤120% constant current limiting, auto-recovery
Over temperature 100℃±10℃ shut down o/p voltage, automatically recover after cooling.
Environment Working TEMP. -40~+60℃ (see below derating curve)
Working Humidity 20~90%RH, non-condensing
Storage TEMP. Humidity -40~+80℃,10~95%RH
TEMP .coefficient ±0.03%/℃(0~50℃)
Vibration 10~500Hz, 5G 10min./1 cycle,period for 60min. each along X,Y,Z axes
Safety&EMC Safety standards UL8750+UL1310
Withstand voltage I/P-O/P:1.88KVAC  
Isolation resistance I/P-O/P:100MΩ/500VDC/25℃/70%RH
EMC EMISSION FCC Part 15 B
Others Weight About 1.3Kg
Size 220*94.5*40mm  (L*W*H)
packing 10PCS/CTN (L*W*H)
Notes 1. All parameters if NOT specially mentioned are measured at 120VAC input , rated load and 25℃of ambient temperature.
2. To extend the driver's using life ,please reduce the loading at lower input voltage.

5 in 1 Dim J-BOX LED Driver 100W

  • Inputwire Black and White to be connected?to?AC?L and N ,Green wire go ground,
  • Output wireRed to LED Positive side (+) , Black ?to LED Negative side (-).??
  • Dimming cable DIM (+) Purpleto 0/1-10V dimmer signal(+ ),DIM (-) Grey?to 0/1-10V dimmer signal (-) ?
  • Please make sure your connect these correctly otherwise your product will not function correctly and could be damaged.

¡ö?Connecting Diagram

Using TRIAC/Phase cut dimming

1.The Pulse-Width Modulation (PWM) of output voltage can be adjusted through input terminal of the AC phase line(L) by connection a phase /Triac dimmer of lighting system.

2.Work with forward phase /leading edge ,MLV and?reverse phase /trailing edge ,ELV,TRIAC dimmers.

3.Please try to use dimmers with power at least 1.5 times as the output power of the driver.

5 in 1 Dim J-BOX LED Driver 100W Connecting Diagram

?Using 0-10/1-10V dimming

?5 in 1 Dim J-BOX LED Driver 100W Connecting Diagram

Product Certificate

You have successfully subscribed!
This email has been registered