Triac Dimmable Driver 150W (Standard Size)
SMT-012-150VT
Triac Dimmable LED Driver
SMARTS
SMARTS POWER high efficiency PF Triac dimmable ac dc led drivers 24v 150w It has short circuit/overload/over voltage protections.In the harsh environment of high temperature, it can still work norm...
SMARTS POWER high efficiency PF Triac dimmable ac dc led drivers 24v 150w It has short circuit/overload/over voltage protections.In the harsh environment of high temperature, it can still work normally and stably. 5-year warranty.
| Model | SMT-012-150VT | SMT-024-150VT | |
| Output | DC Voltage | 12V | 24V |
| Voltage Tolerance | ±0.5V | ||
| Rated current | 12.5A | 6.25A | |
| Rated power | 150W | ||
| Input | Voltage Range | 100-130Vac(ETL) 170-265Vac(CE) 180-265Vac(SAA) |
|
| Frequency Range | 50~60HZ | ||
| Power Factor | 0.65(Full loading) | ||
| Efficiency(Typ.) | 84% | 86% | |
| AC Current(Max.) | 2.4A | 2.4A | |
| Leakage current | ﹤0.50mA/120VAC | ||
| Protection | Short Circuit | Hiccup mode, recover automatically after fault condition is removed | |
| Over Current | ≤1.2*I out | ||
| Over Loading | ≤120% | ||
| Over temperature | 100℃±10℃,Shut down o/p voltage,recover automatically after temperature goes down. | ||
| Environment | Working TEMP. | -40~+60℃ | |
| Working Humidity | 20~95%RH, non-condensing | ||
| Storage TEMP. Humidity | -40~+80℃,10~95%RH | ||
| TEMP .coefficient | ±0.03%/℃(0~50℃) | ||
| Vibration | 10~500Hz,5G 12min./1 cycle,period for 72min. each along X,Y,Z axes | ||
| Safety standards | UL1012 | ||
| Withstand voltage | I/P-O/P:1500VAC | ||
| Isolation resistance | I/P-O/P:100MΩ/500VDC/25℃/70%RH | ||
| Safety&EMC | EMC EMISSION | FCC Part 15 B | |
| EMC IMMUNITY | EN61000-4-2,3,4,5,6,11(Surge about 4KV) | ||
| Others | Weight | 1.65Kg | With junction 2.38Kg |
| Size | 256*78*47mm (L*W*H) | 406*87*60mm (L*W*H) | |
| packing | 305*295*210mm 10PCS/CTN | 445*350*205mm 10PCS/CTN | |
| Notes | 1. All parameters if NOT specially mentioned are measured at 120VAC input , rated load and 25℃ of ambient temperature. | ||
| 2. To extend the driver's using life ,please reduce the loading at lower input voltage. | |||
| 3.Loading should be 5-100%. | |||
¡ù?Input black(L) and white(N) wires to be connected AC, Green wire to be connected ground; output red and black wires to be connected led lighting.
¡ö?Dimming Operation
¡ùOutput constant current level can be adjusted through input terminal of the AC phase line(L) by connection a phase/triac dimmer.
¡ùFor?forward phase,Magnetic low voltage and Triac Dimmer
