Triac Dimmmable CC LED Driver 80W
SMT-067-1200CT
Triac Dimmable LED Driver
SMARTS
Model
SMT-115-0700CT
SMT-090-0900CT
SMT-080-1050CT
SMT-067-1200CT
Output
DC Current
700mA
900mA
1050mA
1200mA
Current Accuracy
±5%
Voltage Range
80-115V
70-90V
55-80V
40-67V
Rated power
...
| Model | SMT-115-0700CT | SMT-090-0900CT | SMT-080-1050CT | SMT-067-1200CT | |
| Output | DC Current | 700mA | 900mA | 1050mA | 1200mA |
| Current Accuracy | ±5% | ||||
| Voltage Range | 80-115V | 70-90V | 55-80V | 40-67V | |
| Rated power | 80W | 80W | 80W | 80W | |
| Input | Voltage Range | 90-130VAC / 170~250VAC | |||
| Frequency Range | 47~63HZ | ||||
| Power Factor (Typ.) | PF≧0.93/110V ; PF≧0.95/220V ; PF≧0.94/250V | ||||
| Full Load Efficiency(Typ.) | >85% | >85% | >85% | >85% | |
| AC Current(Typ.) | 0.14A/110VAC 0.12 A/220VAC 0.01A/250VAC | ||||
| Leakage current | <0.27mA/110VAC; ﹤0.25mA/220VAC | ||||
| Protection | Short Circuit | Hiccup mode, recovers automatically after fault condition is removed. | |||
| Over voltage | ≦270VAC | ||||
| Environment | Working TEMP. | -40~+60℃ | |||
| Working Humidity | 20~90%RH,non-condensing | ||||
| Storage TEM.,Humidity | -40~+80℃,10~95%RH | ||||
| TEMP.coefficient | ±0.03%/℃(0~50℃) | ||||
| Vibration | 10~500Hz,2G 10min./1 cycle,period for 60min.each along X,Y,Z axes | ||||
| Safety&EMC | Safety standards | EN-60950-1, EN-61347-1-2 | |||
| Withstand voltage | I/P-O/P:3.75KVAC | ||||
| Isolation resistance | I/P-O/P:100MΩ/500VDC/25℃/70%RH | ||||
| EMC EMISSION | Compliance toEN55015,EN61000-3-2 (≧50%load) | ||||
| EMC IMMUNITY | Compliance to EN55015,EN61000-4-2,3,4,5,6,8,11,A light industry level (surge4KV) | ||||
| Others | Weight | 0.34Kg/pcs | |||
| Size | 200*68*45mm (L*W*H) | ||||
| packing | 324*298*176mm | ||||
| Notes | 1. All parameters NOT specially mentioned are measured at 110V/230VAC input , rated load and 25℃of ambient temperature. | ||||
| 2. Ripple& noise are measured at 20MHz of bandwidth by using a 12”twisted pair-wire terminated with a 0.1uf &47uf parallel capacitor. | |||||
| 3. Tolerance:includes set us tolerance,line regulation and load regulation . | |||||
Mechanical Specification
Dimming Operation
1. Output constant current level can be adjusted through input terminal of the AC phase line(L) by connection a triac dimmer.
2. Compatible with Leading edge or tailing edge triac dimmers.
3. please try to use the small power dimmers, which can be accessed to a wider dimming range, high-power dimmer is difficult to achieve the output current to zero.
Connection diagram
