Triac Dimmable Driver 60W (Standard Size)
SMT-012-060VT
Triac Dimmable LED Driver
SMARTS
Waterproof IP67 Triac dimmable 12v 60w led driver Waterproof performance is higher than MOSO's dimming power supply 12V, which can work normally and stably in humid indoor and outdoor environments
...
Waterproof IP67 Triac dimmable 12v 60w led driver Waterproof performance is higher than MOSO's dimming power supply 12V, which can work normally and stably in humid indoor and outdoor environments
| Model | SMT-012-060VT | SMT-024-060VT | |
| output | DC Voltage | 12V | 24V |
| Voltage Tolerance | ±0.5V | ||
| Rated current | 5A | 2.5A | |
| Rated power | 60W | ||
| input | Voltage Range | 100-130Vac(UL,ETL) 170-265Vac(CE) 180-265Vac(SAA) |
|
| Frequency Range | 47~63HZ | ||
| Power Factor | 0.65(Full loading) | ||
| Efficiency(Typ.) | 85% | 87% | |
| AC Current(Max.) | 1.0A | 1.0A | |
| Leakage current | ﹤0.50mA/120VAC | ||
| Protection | Short Circuit | Hiccup mode, recover automatically after fault condition is removed | |
| Over Current | ≤1.2*I out | ||
| Over Loading | ≤120% | ||
| Over temperature | 100℃±10℃,Shut down o/p voltage,recover automatically after temperature goes down. | ||
| Environment | Working TEMP. | -40~+60℃ | |
| Working Humidity | 20~90%RH, non-condensing | ||
| Storage TEMP. Humidity | -40~+80℃,10~95%RH | ||
| TEMP .coefficient | ±0.03%/℃(0~50℃) | ||
| Vibration | 10~500Hz,2G 12min./1 cycle,period for 72min. each along X,Y,Z axes | ||
| Safety& EMC | Safety standards | UL8750+UL1310 Class 2 unit | |
| Withstand voltage | I/P-O/P:1500VAC | ||
| Isolation resistance | I/P-O/P:100MΩ/500VDC/25℃/70%RH | ||
| EMC EMISSION | FCC Part 15 B | ||
| others | Net. Weight | 0.55KG(ETL,CE,SAA) 0.95KG(UL) |
|
| Size | 180*60*35mm(ETL,CE,SAA)(L*W*H) 200*70*46(UL)(L*W*H) |
||
| Packing | 430*375*190mm 20PCS/CTN | ||
| Notes | 1. All parameters if NOT specially mentioned are measured at 110VAC input , rated load and 25℃of ambient temperature. | ||
| 2. To extend the driver's using life ,please reduce the loading at lower input voltage. | |||
| 3.Loading should be 5-100%. | |||
¡ùInput Brown with AC (L),Blue with AC(N),Green/Yellow with AC(G)
¡ùOutput Red is£¨DIM+£©,Black is£¨DIM-£©
Dimming Operation
n?Output constant current level can be adjusted through input terminal of the AC phase line(L) by connection a triac dimmer.
n?Compatible with Leading edge or tailing edge triac dimmers.
n?please try to use the small power dimmer, have access to a wider dimming range, high-power dimmer is difficult to achieve the output current to zero
