5 in 1 Class 2 Dim J-BOX LED Driver 180W
SMT-012-180VTD52JV2
5 in 1 Dimmable LED Driver
SMARTS
This triac dimming led driver 12V operates high wattage 180W, but also meet Class 2 standard. A type of muitlple output 3*60W. Driver for wet & damp & dry location. dimmers for US versionis...
This triac dimming led driver 12V operates high wattage 180W, but also meet Class 2 standard. A type of muitlple output 3*60W. Driver for wet & damp & dry location. dimmers for US versionis recommended.
| Model | SMT-012-180VTD52JV2 (1.0 version) | SMT-024-192VTD52JV2 (1.0 version) | |
| SMT-012-180VTD52JWV2 (2.0 version) | SMT-024-192VTD52JWV2 (2.0 version) | ||
| Output | DC Voltage | 12V | 24V |
| Voltage Tolerance | ±0.5V | ||
| Voltage Regulation | ±0.5% | ||
| Voltage Tolerance | ±0.5V | ||
| Load Regulation | ±1% | ±1% | |
| Rated current | 3*5A | 2*4A | |
| Rated power | 180W(3*60W) | 192W (2*96W) | |
| Input | Voltage Range | 100-277VAC | |
| Frequency Range | 47~63HZ | ||
| Power Factor(Typ.)@full load | 0.99@120VAC 0.94@277VAC | 0.99@120VAC 0.94@277VAC | |
| THD(Typ.)@full load | <20% | ||
| Full Load Efficiency(Typ.) | 86%@120VAC , 88%@277VAC | 87%@120VAC , 89%@277VAC | |
| AC Current(Typ.) | 2.2A@100VAC | 2.3A@100VAC | |
| Inrush Current (Typ.) | 19A (twidth=1.3ms) @120VAC ; 38A (twidth=960us) @277VAC | 19A (twidth=1.3ms) @120VAC ; 38A (twidth=960us) @277VAC | |
| Leakage current | <0.50mA | ||
| Protection | Short Circuit | shut down o/p voltage, re-power on to recover after fault condition is removed | |
| Over loading | ≤120% constant current limiting, auto-recovery | ||
| Over temperature | 100℃±10℃ shut down o/p voltage, automatically recover after cooling. | ||
| Over Current | ≤1.4*I out | ||
| Environment | Working TEMP. | -40~+60℃ | |
| Working Humidity | 20~90%RH,non-condensing | ||
| Storage TEM.,Humidity | -40~+80℃,10~95%RH | ||
| TEMP.coefficient | ±0.03%/℃(0~50℃) | ||
| Vibration | 10~500Hz 2G 10min./1 cycle,period for 60min.each along X,Y,Z axes | ||
| Safety&EMC | Safety standards | UL8750+UL1310 | |
| Withstand voltage | I/P-O/P: 1.88KVAC | ||
| Isolation resistance | I/P-O/P:100MΩ/500VDC/25℃/70%RH | ||
| EMC EMISSION | FCC Part 15 B | ||
| Others | Weight | 2.3Kg | |
| Size | 1.0version:278*110*45mm/2.0version:278*130*45mm(L*W*H) | ||
| packaging | 340*210*245mm/8pcs /CTN G.W.:19.50KG/CTN (1.0 version) 385*335*200mm 20PCS/CTN | ||
| Notes | 1. All parameters NOT specially mentioned are measured at 110V & 277VAC input , rated load and 25℃of ambient temperature. | ||
| 2..Tolerance:includes set us tolerance,line regulation and load regulation. | |||
- Input wire Black and White to be connected to AC L and N ,Green wire go ground,
- Output wire Red to LED Positive side (+) , Black to LED Negative side (-).?
- Dimming cable DIM (+) Purple to 0/1-10V dimmer signal(+ ),DIM (-) Grey to 0/1-10V dimmer signal (-)
- Please make sure your connect these correctly otherwise your product will not function correctly and could be damaged.
¡ö?Connecting Diagram
Using TRIAC/Phase cut dimming
1.The Pulse-Width Modulation (PWM) of output voltage can be adjusted through input terminal of the AC phase line(L) by connection a phase /Triac dimmer of lighting system.
2.Work with forward phase /leading edge ,MLV and?reverse phase /trailing edge ,ELV,TRIAC dimmers.
3.Please try to use dimmers with power at least 1.5 times as the output power of the driver.
?Using 0-10/1-10V dimming
?
