5 in 1 Dimmable LED Driver 80W (Standard Size)
The waterproof electronic led driver has a wide input range from 100-277VAC,which operates smooth dimming effect from 0-100%. dimmers 100-130V shows perfect dimming after we tested.
| model | SMT-012-080VTD | SMT-024-080VTD | |
| Output | DC Voltage | 12V | 24V |
| Voltage Accuracy | ±0.5V | ±0.5V | |
| Rated current | 6.66A | 3.33A (class 2) | |
| Rated power | 80W | ||
| Input | Voltage Range | 100~130V AC/170~265V AC | |
| Frequency Range | 47~63HZ | ||
| Power Factor ( Typ.) | PF≧0.95/110V,PF≧0.96/170V,PF≧0.95/220V,PF≧0.93/265V | ||
| Full Load Efficiency(Typ.) | 80%@120VAC 82%@277VAC | 82%@120VAC 85%@277VAC | |
| THD(Typ. ) @ full load | <20%@120VAC &277VAC | ||
| AC Current(Typ.) | 1.15A | ||
| Inrush Current (Typ.) | 20A, 50%, 1.6ms @120VAC; 25A, 50% 1.2ms @277VAC | ||
| Leakage current | ﹤0.5mA | ||
| Protection | Short Circuit | Hiccup mode, recovers automatically after fault condition is removed. | |
| Over temperature | 100℃±10℃ shut down o/p voltage, automatically recover after cooling. | ||
| Over Load | ≤120% constant current limiting, auto-recovery | ||
| Environment | Working TEMP. | -40~+60℃ | |
| Working Humidity | 20~90%RH,non-condensing | ||
| Storage TEM.,Humidity | -40~+80℃,10~95%RH | ||
| TEMP.coefficient | ±0.03%/℃(0~50℃) | ||
| Vibration | 10~500Hz,2G 10min./1 cycle,period for 60min.each along X,Y,Z axes | ||
| Safety&EMC | Safety standards | UL8750 + UL1310 , CAN/CSA-C22.2 No.250.13 | |
| Withstand voltage | I/P-O/P:1.88KVac | ||
| Isolation resistance | I/P-O/P:100MΩ/500VDC/25℃/70%RH | ||
| EMC EMISSION | FCC 47 CFR Part 15 ,Subpart B | ||
| Others | Weight | 1.1Kg | |
| Size | 230*70*43mm(L*W*H) | ||
| packing | Carton size:340*275*170mm , 10pcs /CTN | ||
| Notes | 1. All parameters NOT specially mentioned are measured at 120VAC input , rated load and 25℃of ambient temperature. | ||
| 2. Tolerance: includes set up tolerance, line regulation and load regulation . | |||
| 3. The power supply is considered as a component that will be operated in combination with final Equipment. Since EMC performance will be affected by the complete installation, the final equipment manufactures must be-qualify EMC Directive on the complete installation again. | |||
Dimming Operation and Connecting Diagram
¡ùUsing two ways of dimming at the same time, you must be assured that LED lighting is up to the max. Brightness then you could operate with the other dimming;
¡ùUsing one dimming ---TRIAC/Phase cut dimming
1.The Pulse-Width Modulation (PWM) of output voltage can be adjusted through input terminal of the AC phase line(L) by connection a phase /Triac dimmer of lighting system.
2.Working with forward phase /leading edge ,MLV and Reverse phase /trailing edge ,ELV,TRIAC dimmers
3.Min loading is about 10%
4.Please try to use dimmers with power at least 1.5 times as the output power of the driver.
