DALI 2& PUSH Dim C.V. LED Driver 200W (DT6)
SMT-12200V-DP2
Smarts Power
waterproof ip67 dali & push dimming led driver Passed the dali Dimming protocol, has NFC function built in, can set the address code
Model
SMT-12200V-DP2
SMT-24200V-DP2
SMT-36200V-DP2
SMT-4...
waterproof ip67 dali & push dimming led driver Passed the dali Dimming protocol, has NFC function built in, can set the address code
Model | SMT-12200V-DP2 | SMT-24200V-DP2 | SMT-36200V-DP2 | SMT-48200V-DP2 | |
Output | DC Voltage | 12V (12-13.5Vadjust by NFC) | 24V (24-26V adjust by NFC) | 36V (36-38V adjust by NFC) | 48V (48-50V adjust by NFC) |
Voltage Tolerance | ±0.2V | ||||
Rated current | 16.67A | 8.34A | 5.56A | 4.17A | |
Rated power | 200W | ||||
Load Regulation | ±2% | ||||
Input | Standby power consumption | ≤0.5W | ≤0.5W | ≤0.6W | ≤0.6W |
Voltage Range | 110-277VAC | ||||
Frequency Range | 47 - 63Hz | ||||
Power Factor(Typ.)@ full load | PF≥0.98@120VAC PF≥0.96@230VAC PF≥0.95@277VAC (Full loading) | ||||
THD(Typ.)@ full load | ≤10%@120VAC ; ≤10%@230VAC; ≤15%@277VAC | ||||
Efficiency(Typ.)@ full load | 89%@120VAC; 91%@230VAC; 91%@277VAC; | ||||
AC Current(Max.) | 2.3A | ||||
Inrush Current (Typ.) | 38.4A,510us@50%Ipeak(120VAC);88A,120us@50%Ipeak(230VAC) 48A,560us@50%Ipeak (277VAC) | ||||
Leakage current | <0.5mA | ||||
Protection | Short Circuit | Hiccup mode, recover automatically after fault condition is removed | |||
Over Load | ≤120% ,hiccup mode, recover automatically after fault condition is removed | ||||
Over temperature | Ambient temp. over 55℃±10℃, output will be off; recovers automatically after temp. drops. | ||||
Environment | Working TEMP. | -40~+70℃ (see below derating curve) | |||
Working Humidity | 20 - 95%RH,non-condensing | ||||
Storage TEM.,Humidity | -40 - +80℃,10 - 95%RH | ||||
TEMP.coefficient | ±0.03%/℃(0 - 50℃) | ||||
Vibration | 10~500Hz, 2G 10min./1 cycle,period for 60min. each along X,Y,Z axes | ||||
Safety&EMC | Safety standards | EN61347-1 EN61347-2-13 (EU) & UL8750 (US) | |||
Withstand voltage | I/P-O/P:3.75KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC (EU); I/P-O/P:1.88KVAC (US) | ||||
Isolation resistance | I/P-O/P I/P-FG O/P-FG:100MΩ/500VDC/25℃/70%RH | ||||
EMC Emission | EN55015 EN61000-3-2 EN61000-3-3 (EU)≥50% Load & FCC Part 15 B (US) | ||||
EMC Immunity | EN61000-4-2,3,4,5,6 ,11, EN61547 | ||||
Others | Weight | 1.05KG | |||
Dimension | 278*78*25.1mm (L*W*H) | ||||
packing | 390*325*185mm/20PCS/CTN G.W.:22KG/CTN | ||||
Notes | 1. All parameters NOT specially mentioned are measured at 120VAC/230VAC input , rated load and 25℃of ambient temperature. | ||||
2. Tolerance: includes set up tolerance, line regulation and load regulation . | |||||
3. The power supply is considered as a component that will be operated in combination with final Equipment. Since EMC performance will be affected by the complete installation, the final equipment manufactures must be-qualify EMC Directive on the complete installation again. |