5 in 1 Class 2 Dim J-BOX LED Driver 300W
SMT-012-300VTD52JV2
5 in 1 Dimmable LED Driver
SMARTS
If you are looking for 300W led driver combines triac and 0-10v dimming mode, this driver is one of the options. Guaranteed 7 years warranty. It is compatible with dimmer 100-130V.
Model
SMT-01...
If you are looking for 300W led driver combines triac and 0-10v dimming mode, this driver is one of the options. Guaranteed 7 years warranty. It is compatible with dimmer 100-130V.
| Model | SMT-012-300VTD52JV2(1.0 version) | SMT-024-288VTD52JV2 (1.0 version) | ||
| SMT-012-300VTD52JWV2(2.0 version) | SMT-024-288VTD52JWV2 (2.0 version) | |||
| Output | DC Voltage | 12V | 24V | |
| Voltage Tolerance | ±0.5V | |||
| Voltage Regulation | ±0.5% | |||
| Voltage Tolerance | ±0.5V | |||
| Load Regulation | ±2% | ±1% | ||
| Rated current | 25A (multi current 5*5A) | 12A(multi current 3*4A) | ||
| Rated power | 300W (5*60W) | 288W (3*96W) | ||
| Input | Voltage Range | 100-277VAC | ||
| Frequency Range | 47~63HZ | |||
| Power Factor (Typ.)@full load | 0.95@120VAC 0.95@277VAC | 0.99@120VAC 0.96@277VAC | ||
| THD(Typ.)@full load | <20% | |||
| Inrush Current(Typ.) | 35A (twidth=960us) @120VAC ; 43A (twidth=1ms) @277VAC | |||
| Efficiency(Typ.)@Full Load | 85%@120VAC 90%@277VAC | 87%@120VAC 89%@277VAC | ||
| AC Current(Typ.) | 3.6A@100VAC | 3.4A@100VAC | ||
| Leakage current | <0.50mA | |||
| Protection | Short Circuit | shut down o/p voltage, re-power on to recover after fault condition is removed | ||
| Over load | ≤120% constant current limiting, auto-recovery | |||
| Over temperature | 100℃±10℃ shut down o/p voltage, automatically recover after cooling. | |||
| Over Current | ≤1.4*I out | |||
| Environment | Working TEMP. | -40~+60℃ | ||
| Working Humidity | 20~90%RH,non-condensing | |||
| Storage TEM.,Humidity | -40~+80℃,10~95%RH | |||
| TEMP.coefficient | ±0.03%/℃(0~50℃) | |||
| Vibration | 10~500Hz 2G 10min./1 cycle,period for 60min.each along X,Y,Z axes | |||
| Safety&EMC | Safety standards | UL8750+UL1310 | ||
| Withstand voltage | I/P-O/P:1.88KVAC | |||
| Isolation resistance | I/P-O/P:100MΩ/500VDC/25℃/70%RH | |||
| EMC EMISSION | FCC Part 15 B | |||
| EMC IMMUNITY | EN61000-4-2,3,4,5,6,11(Surge 4KV) | |||
| Others | Weight | 2.4Kg | ||
| Size | 1.0 version: 301*110*45mm 2.0 version: 301*140*45mm | |||
| packaging | 365*210*245mm/8pcs /CTN G.W.:21KG/CTN 385*335*200mm 20PCS/CTN | |||
| Notes | 1. All parameters NOT specially mentioned are measured at 110V & 277VAC input , rated load and 25℃of ambient temperature. | |||
| 2..Tolerance:includes set us tolerance,line regulation and load regulation. | ||||
- Input wire Black and White to be connected to AC L and N ,Green wire go ground,
- Output wire Red to LED Positive side (+) , Black to LED Negative side (-).?
- Dimming cable DIM (+) Purple to 0/1-10V dimmer signal(+ ),DIM (-) Grey to 0/1-10V dimmer signal (-)
- Please make sure your connect these correctly otherwise your product will not function correctly and could be damaged.
¡ö?Connecting Diagram
Using TRIAC/Phase cut dimming
1.The Pulse-Width Modulation (PWM) of output voltage can be adjusted through input terminal of the AC phase line(L) by connection a phase /Triac dimmer of lighting system.
2.Work with forward phase /leading edge ,MLV and?reverse phase /trailing edge ,ELV,TRIAC dimmers.
3.Please try to use dimmers with power at least 1.5 times as the output power of the driver.
?Using 0-10/1-10V dimming
?
