DALI & Push Dimmable CV LED driver 150w
$174.40
-
$3,662.40
DALI Dimmable Driver 200W (Standard Size)
$201.20
-
$4,489.80
DALI & Push Dimmable CV LED driver 150w
$174.40
-
$3,662.40
DALI Dimmable Driver 200W (Standard Size)
$201.20
-
$4,489.80
DALI & Push Dimmable CV LED driver 100w
SMT-012-100VMH
DALI Dimmable LED Driver
SMARTS
Dali dimming led driver 100W 12V waterproof ip67, passed the CE certification, is very popular in the European market, high PF>0.9, high efficiency>88% design makes this power supply high qua...
Dali dimming led driver 100W 12V waterproof ip67, passed the CE certification, is very popular in the European market, high PF>0.9, high efficiency>88% design makes this power supply high quality, with a 7-year warranty, can protect the 100W LED modules for longer time
| Model | SMT-012-100VMH | SMT-024-100VMH | |
| Output | DC Voltage | 12V | 24V |
| Voltage Tolerance | ±0.5V | ||
| Voltage Regulation | ±0.5% | ||
| Rated current | 8.33A | 4.16A | |
| Rated power | 100W | ||
| Load Regulation | ±0.2% | ||
| Input | Voltage Range | 100-265VAC | |
| Frequency Range | 47 - 63Hz | ||
| Power Factor(Typ.)@ full load | PF≥0.99 / 120VAC PF≥0.98/ 230VAC (Full loading) | ||
| THD(Typ.)@ full load | <15% | ||
| Efficiency(Typ.)@ full load | 87% | 86% | |
| AC Current(Max.) | 1.16A | 1.17A | |
| Inrush Current (Typ.) | 13.2A/120VAC 59A/230VAC | ||
| Leakage current | <0.5mA | ||
| Protection | Short Circuit | constant current mode, recover automatically after fault condition is removed | |
| Over Load | ≤120% constant current limiting, recover automatically after fault condition is removed | ||
| Over temperature | 100℃±10℃ Shut down o/p voltage, recovers automatically after temperature goes down | ||
| Protection Class | Ⅰ | ||
| Environment | Working TEMP. | -40~+60℃ (see below derating curve) | |
| Working Humidity | 20 - 95%RH ,non-condensing | ||
| Storage TEM.,Humidity | -40 - +80℃,10 - 95%RH | ||
| TEMP.coefficient | ±0.03%/℃(0 - 50℃) | ||
| Vibration | 10~500Hz, 5G 10min./1 cycle,period for 60min. each along X,Y,Z axes | ||
| Safety&EMC | Safety standards | EN61347-1 EN61347-2-13 IP67 | |
| Withstand voltage | I/P-O/P:3.75KVAC I/P-FG:1.88KVAC O/P-FG:0.5KVAC | ||
| Isolation resistance | I/P-O/P I/P-FG O/P-FG:100MΩ/500VDC/25℃/70%RH | ||
| EMC Emission | EN55015 EN61000-3-2 ,EN61000-3-3 | ||
| EMC Immunity | EN61000-4-2,3,4,5,6 ,11, EN61547 | ||
| Others | Weight | 1.1Kg | |
| Dimension | 210*70*43mm(L*W*H) | ||
| packing | 340*275*170mm/10pcs /CTN | ||
| Notes | 1. All parameters NOT specially mentioned are measured at 230VAC input , rated load and 25℃of ambient temperature. | ||
| 2. Tolerance: includes set up tolerance, line regulation and load regulation . | |||
| 3. The power supply is considered as a component that will be operated in combination with final Equipment. Since EMC performance will be affected by the complete installation, the final equipment manufactures must be-qualify EMC Directive on the complete installation again. | |||
■ Input & Output wiring
- Input Rubber cable 3*0mm²,the green/yellow cable connect with (FG) ,Brown with AC (L),Blue with AC(N)
- Output rubber cable2*1.0mm² , Red is output ( V+) Positive,Black is output (V-) Connected to LED Lamps.
■ Dimming wiring
- Dimming Rubber cable2*75mm², Blue DA/N and White DA/L (No polar) connected to the DALI BUS when use DALI function .
Blue (N) and Brown (L) connect to AC (N) and Push dim switch dimmer( L) when use Push function.
- Please make sure you connect these correctly otherwise your product will not function correctly and could be damaged.
Note: Any other requests we can customize.
