DALI & Push Dimmable CV LED driver 100w
$132.00
-
$2,772.00
DALI & Push Dimmable CV LED driver 100w
$132.00
-
$2,772.00
DALI & Push Dimmable CV LED driver 150w
SMT-012-150VMH
DALI Dimmable LED Driver
SMARTS
SMARTS 150W DALI dimmable led driver has passed the CE certification, the waterproof grade is ip67, the aluminum shell has good waterproof performance, and the input voltage is 100-265vac. It is ma...
SMARTS 150W DALI dimmable led driver has passed the CE certification, the waterproof grade is ip67, the aluminum shell has good waterproof performance, and the input voltage is 100-265vac. It is mainly sold in Europe. The constant voltage working mode makes it possible to match 150W LED downlight Smooth dimming
| Model | SMT-012-150VMH | SMT-024-150VMH | |
| Output | DC Voltage | 12V | 24V |
| Voltage Tolerance | ±0.5V | ||
| Voltage Regulation | ±0.5% | ||
| Rated current | 12.5A | 6.25A | |
| Rated power | 150W | ||
| Load Regulation | ±0.2% | ||
| Input | Voltage Range | 100-265VAC | |
| Frequency Range | 47 - 63Hz | ||
| Power Factor(Typ.)@ full load | PF≥0.99 / 120VAC PF≥0.96/ 230VAC (Full loading) | ||
| THD(Typ.)@ full load | <20% | ||
| Efficiency(Typ.)@ full load | 88% | 88% | |
| AC Current(Max.) | 1.72A | 1.72A | |
| Inrush Current (Typ.) | 16A/120VAC 56A/230VAC | ||
| Leakage current | <0.5mA | ||
| Protection | Short Circuit | constant current mode, recover automatically after fault condition is removed | |
| Over Load | ≤120% constant current limiting, recover automatically after fault condition is removed | ||
| Over temperature | 100℃±10℃ Shut down o/p voltage, recovers automatically after temperature goes down | ||
| Protection Class | Ⅰ | ||
| Environment | Working TEMP. | -40~+60℃ (see below derating curve) | |
| Working Humidity | 20 - 95%RH ,non-condensing | ||
| StorageTEM.,Humidity | -40 - +80℃,10 - 95%RH | ||
| TEMP.coefficient | ±0.03%/℃(0 - 50℃) | ||
| Vibration | 10~500Hz, 5G 10min./1 cycle,period for 60min. each along X,Y,Z axes | ||
| Safety&EMC | Safety standards | EN61347-1 EN61347-2-13 IP67 | |
| Withstand voltage | I/P-O/P:3.75KVAC I/P-FG:1.88KVAC O/P-FG:0.5KVAC | ||
| Isolation resistance | I/P-O/P I/P-FG O/P-FG:100MΩ/500VDC/25℃/70%RH | ||
| EMC Emission | EN55015 EN61000-3-2 ,EN61000-3-3 | ||
| EMC Immunity | EN61000-4-2,3,4,5,6 ,11, EN61547 | ||
| Others | Weight | 1.2Kg | |
| Dimension | 245*70*43mm(L*W*H) | ||
| packing | 320*270*170mm/10pcs /CTN | ||
| Notes | 1. All parameters NOT specially mentioned are measured at 230VAC input , rated load and 25℃of ambient temperature. | ||
| 2. Tolerance: includes set up tolerance, line regulation and load regulation . | |||
| 3. The power supply is considered as a component that will be operated in combination with final Equipment. Since EMC performance will be affected by the complete installation, the final equipment manufactures must be-qualify EMC Directive on the complete installation again. | |||
■ Input & Output wiring
- Input Rubber cable 3*0mm²,the green/yellow cable connect with (FG) ,Brown with AC (L),Blue with AC(N)
- Output rubber cable2*1.5mm² , Red is output ( V+) Positive,Black is output (V-) Connected to LED Lamps.
■ Dimming wiring
- Dimming Rubber cable2*75mm², Blue DA/N and White DA/L (No polar) connected to the DALI BUS when use DALI function .
Blue (N) and Brown (L) connect to AC (N) and Push dim switch dimmer( L) when use Push function.
- Please make sure you connect these correctly otherwise your product will not function correctly and could be damaged.
Note: Any other requests we can customize.
